// UART Sample Code // NXP Semiconductors // // MCB2130 Board LPC21238: runs in internal Flash // MCB2130 Ram: runs in internal RAM /////////////////////////////////////////////////////////////////////// The UART sample code initializes UART0 (COM0) and sends out a "HELLO". Afterwards it will simply echo anything it receives. Use a serial terminal utility with the following settings: Baud: 115200 Data: 8 Parity: None Handshake: None Note: UART0 has a ISP bootloading feature which might cause the LPC2138 to stay in the bootloader after a reset (Pin 7 and Pin 4 are used as RTS and DTR). This can be avoided by either disconnectiong the ISP and RST jumpers.

UART\Abstract.txt
....\Flash\UART.plg
....\RAM.ini
....\Retarget.c
....\Serial.c
....\Startup.s
....\uart.c
....\uart.h
....\uarttest.c
....\UART_MCB2130 Board - LPC2138.dep
....\UART_Opt.Bak
....\UART.Uv2.bak
....\UART.uvproj
....\UART.opt.bak
....\UART_uvopt.bak
....\UART.uvopt
....\Flash
....\Ram
UART

• We are an exchange download platform that only provides communication channels. The downloaded content comes from the internet. Except for download issues, please Google on your own.
• The downloaded content is provided for members to upload. If it unintentionally infringes on your copyright, please contact us.
• Please use Winrar for decompression tools
• If download fail, Try it againg or Feedback to us.
• If downloaded content did not match the introduction, Feedback to us，Confirm and will be refund.
• Before downloading, you can inquire through the uploaded person information

Nothing．