This example shows how external devices such as external SRAM and FLASH, and peripherals such as LCD-display, A/D, and D/A can be access with the External Memory Interface. To enable the External Memory Interface, the SRE bit must be set in the MCUCR register and optionally one or more wait states. When the AT90S8515 is operated in the external SRAM mode, port A is used as a multiplexed low-order address bus and data bus while port C is is used as high order address bus. In this example data is written to external memory location $4000 and read back and output to LED connected to port B. Note: When using AVR Studio 4 for simulation, External Memory Interface must be enabled using the menu Option "Debug -> AVR Simulator Options -> Device Selection and select check box "External Memory Interface"

externalsram.c

• We are an exchange download platform that only provides communication channels. The downloaded content comes from the internet. Except for download issues, please Google on your own.
• The downloaded content is provided for members to upload. If it unintentionally infringes on your copyright, please contact us.
• Please use Winrar for decompression tools
• If download fail, Try it againg or Feedback to us.
• If downloaded content did not match the introduction, Feedback to us，Confirm and will be refund.
• Before downloading, you can inquire through the uploaded person information

Nothing．