Description: 灯光控制，系统进行设置，调光等功能，常用的功能都在里面了-Lighting control system settings, such as dimming function, commonly used features are inside the Platform: |
Size: 36864 |
Author:yifi |
Hits:
Description: DMX灯光控制系统一
电脑灯DMX512协议信号DMX是Digital Multipiex 的缩写。ESTA是美国娱乐服务与技术协会.-DMX lighting control system of one computer DMX signal lights DMX512 protocol is an acronym for Digital Multipiex. ESTA is the American entertainment services and technology association. Platform: |
Size: 62464 |
Author:wang |
Hits:
Description: 用W77E58开发的单片机短信收发代码，已经应用在路灯控制、远程抄表等项目里，请放心使用-W77E58 developed with single-chip transceiver message code, has been used in street lighting control, remote meter reading and other projects, please rest assured that the use of Platform: |
Size: 10240 |
Author:祁国梁 |
Hits:
Description: 光电池LED自动照明控制系统的设计与实现，这是一套毕业设计，里面包括电路原理图和程序原码包，还有相关的芯片资料，这是一套很大的系统
-Battery LED light automatic lighting control system design and implementation, which is a graduation project, which include the circuit schematic diagram and procedures for the original code package, and chip-related information, this is a great system Platform: |
Size: 714752 |
Author:aulyp |
Hits:
Description: 路灯控制系统 可以根据光度传感器的测量值 开启或关闭路灯 有节能功能-Street lighting control system based on photometric measurement of the sensor to open or close the street there are energy-saving features Platform: |
Size: 142336 |
Author:muqiang |
Hits:
Description: 单片机在路灯定时控制系统中的应用，详述了路灯控制仪的原理和硬件结构、控制流程。-Single-chip timing in the street lamp control system, detailing the principles of street lighting controller and hardware structures, control flow. Platform: |
Size: 70656 |
Author:许珍 |
Hits:
Description: 多功能电力载波模块采用了高度集成的电路设计，整个模块取消了外围电力线耦合电路和调整电路，具体应用时简单到只需接入外部供电电源即可，数据的发送和接收也只需遵循常用的单片机串口协议进行操作即可。
适用场合，例如：
1.宾馆、酒店、商场、学校、小区灯光的集中控制和管理
2.无人值班的电气设备的远程控制和管理
3.工厂、矿井的电气设备的远程控制和监控
4.远程温度、湿度的测量和监控
5.远程抄表系统
6.简单的基于电力线的内部呼叫系统
7.智能家居的各种应用
8.替代各种有线方式的数据传输，节省成本-Low-cost Power Line Multi-function module using a highly integrated circuit design, the entire abolition of the external module power line coupling circuit and adjust the circuit, the specific application can access the simple to the external power supply can, to send and receive data can also follow the commonly used single-chip serial port protocol operation.
The application of occasions, such as:
1. Guesthouses, hotels, shopping malls, schools, residential lighting control and management of centralized
2. No one on duty electrical equipment, remote control and management
3. Factories, mine electrical equipment remote control and monitoring
4. Remote Temperature and humidity measurement and control
5. Remote meter reading system
6. A simple power line-based system of internal calls
7. Intelligent home applications
8. To replace the various forms of data transmission cable, to cut costs Platform: |
Size: 560128 |
Author: |
Hits:
Description: 红外遥控控光，用于对灯光的遥控控制，里边有各个模块的程序和分析-Infrared remote control light, used for remote control of lighting, inside there are procedures and analysis of each module Platform: |
Size: 22528 |
Author:loewen |
Hits:
Description: 这是基于单片机的C语言开发，应用领域是现代化智能客房控制系统，控制灯光、空调、风机等、对酒店客房实现智能化管理。-This is based on single chip C-language development, application areas of modern intelligent room control system, control lighting, air conditioning, fans, etc., on the intelligent management of hotel rooms. Platform: |
Size: 209920 |
Author:张凯 |
Hits:
Description: 教室人数监视及照明控制系统 本系统以AT89S52单片机为基础，利用220V交流电供电-The number of classrooms and lighting control systems to monitor the AT89S52 microcontroller-based system, the use of 220V AC power supply Platform: |
Size: 229376 |
Author:ziyelengzui |
Hits:
Description: 基于防盗报警系统的室内灯光调节系统
使用VFW读取USB摄像头数据，转化为室内灯光强度，显示并通过串口发送-Anti-theft alarm system based on indoor lighting control system using the USB camera VFW read data into the interior light intensity, display and sent through the serial port Platform: |
Size: 7346176 |
Author:benny |
Hits:
Description: 太阳能路灯系统能耗较大，所需配套的蓄电池容量也较大，造成成本过高，影47T太阳能路灯系统的实际工程推广。针对此
问题，设计出了一种新型的节能照明控制器，与传统路灯控制器相比，可使能耗大大降低。该控制器控制功能易于实现，运行可
靠，可使照明工程既满足功能性的要求，又能实现最大限度的节能。-Large energy consumption in solar streetlight system, the required battery capacity is also supporting a larger, resulting in high costs, the shadow 47T solar streetlight system to promote the practical engineering. To solve this problem, designed a new type of energy-saving lighting control, compared with the traditional lamp controller, can greatly reduce energy consumption. Control of the controller is easy to implement, reliable, lighting can not only meet functional requirements, but also maximize energy savings. Platform: |
Size: 112640 |
Author:萧志 |
Hits:
Description: 就是根据隧道照明的影响因素，编写的控制策略-Is based on the impact of tunnel lighting factors, the preparation of the control strategy Platform: |
Size: 4096 |
Author:丁正洋 |
Hits:
Description: 照明控制系统，实现的功能是采集声音和光度信息，然后使用AD芯片采用，然后在LCD1602显示，并且进行路灯控制。同时还可以显示时间，使用串口更新时间，还可以显示温度（18B20），还有红外遥控的使用。-Lighting control system, function is to capture the sound and photometric information, and then use the AD chip uses, and then the LCD1602 display, and street lighting control. It also can display time, the serial update time, can also be displayed the temperature (18B20), as well as the use of infrared remote control. Platform: |
Size: 93184 |
Author:sun |
Hits:
Description: 基于DMX512的景观照明管控系统的研究，系统介绍详细，调理清晰，可以一看-DMX512-based landscape lighting control systems research, the system introduced in detail, conditioning clear, one can see Platform: |
Size: 7195648 |
Author:吕海阳 |
Hits:
Description: 程序功能：实现楼道间照明灯的方便控制，一个照明灯，在楼上和楼下各有一个（闭合式）开关控制。开关的闭合并不直接决定灯的亮灭，而开关状态的改变才是决定灯亮灭的关键。即不管两个开关当前的状态
如何，只要有一个开关状态发声变化，都会使照明灯在打亮或者熄灭两种状态间切换。比如当有人要上楼，若之前灯是灭的，在按下楼下开关后（此后开关为闭合状态），灯会打亮；当到楼上后，再按楼上开关，灯会熄灭。而当后来又有人上楼时，再按次楼下开关（此后开关为打开状态），灯同样会打亮；此试验中，用P1口相连的第一个led来模拟照明灯，而用s2和s3来模拟两个开关。注意，因为实际楼道中的
开关为闭合式的，而TX-1C的开关为反弹式的，所以实验时，请用手一直按着按键演示开关的闭合。-Program features: to achieve a convenient corridor between the lighting control, a lamp, in the upstairs and downstairs have a (Closed) switch. Switch closure does not directly determine the bright lights and the switch state changes is what determines the key lights off. That regardless of how the current state of the two switches, as long as there is an audible switch status changes, will cause the lights lit or extinguished in the switch between the two states. For example, when someone wants to go upstairs, if before the lights are off, and press the downstairs switch (thereafter switch is closed), the lamp lit when upstairs, press upstairs switch, the lamp goes out. And when later someone upstairs, then downstairs switch times (since the switch is open), the lamp will also be highlighted this test, the P1 port is connected with the first one led to simulate lighting, but with s2 and s3 to simulate two switches. Note that because the actual corridor-style switch is closed, while Platform: |
Size: 8192 |
Author:崔海波 |
Hits:
Description: 该源码主要是单片机与NRF24L01通信的代码，单片机通过控制NRF24L01 2.4G无线芯片间接实现调节灯光。灯光的控制主要是通过PWM来实现的。-The source is mainly single-chip microcomputer and NRF24L01 communication code, MCU NRF24L01 2.4 G wireless chip control through indirect can adjust light.Lighting control is mainly done by PWM. Platform: |
Size: 90112 |
Author:苏晓亮 |
Hits:
Description: Niagara 模拟小练习——照明控制系统~实现了部分场景控制，如全开，全关，部分开，部分关。-Its simulation exercises, lighting control system to realize the part of the scene control, such as open, close, some open, some closed. Platform: |
Size: 2311168 |
Author:徐江利 |
Hits:
Search - lighting control