Search - FIFO - CodeBus

Search - FIFO - List

[SCM] INTSIO2 DL : 0: 应用于51芯片的很经典的串口通讯程序源代码（采用fifo方式）-chips used in 51 of the classic serial communication program source code (using fifo mode)
Date : 2025-12-22 Size : 37kb User : 谢君成
[SCM] 大连软件园 DL : 0: 功能强大的时钟中断，单片机和FIFO的接口和操作，单片机串口编程问题，纯软件单片机串口，串口通信的单片机程序，程序的多任务和资源复用举例，采用软件定时的计算方法-powerful clock interruption, the 8031 and FIFO interface and operation, the 8031 serial programming, software-only MCU, the MCU serial communication procedures, the procedures for multi-task and resource reuse, for example, regularly use the software method of calculation
Date : 2025-12-22 Size : 17kb User : 王胜
[SCM] C8051F040_CAN_block DL : 0: This program configures the external memory interface and CAN to receieve data in a FIFO buffer and store the data in XRAM. Meant to receive data from another CAN device.-This program configures the external memory interface and CAN to receieve data in a FIFO buffer and store the data in XRAM. Meant to receive data from another CAN device.
Date : 2025-12-22 Size : 11kb User : sf
[SCM] SerialFIFOForC51 DL : 0: 89S52上实现51单片机的串口FIFO功能。即串口的收和发均采用了FIFO作为缓冲。相信这个程序有助于单片机的新手编写串口操作-89S52 achieve 51 MCU Serial FIFO functions. Serial admission that the hair and are used as a FIFO buffer. I believe this program helps prepare newcomers MCU serial operation
Date : 2025-12-22 Size : 32kb User : 陈根潮
[SCM] FX2_Slave_FIFO DL : 0: 68013 Usb2.0芯片Fifo驱动驱动程序源代码-68,013 Usb2.0 SC16CxxBUARTs driver chip driver source code
Date : 2025-12-22 Size : 84kb User : Linger
[SCM] 51FIFO DL : 0: 51单片机的FIFO(先入先出)循环队列实现-51 SCM FIFO (first-in-first out) Revolving Queuing
Date : 2025-12-22 Size : 1kb User : tangcongfai
[SCM] rs232 DL : 0: 利用FIFO数据结构,在8051单片机上实现全双工通讯,实现MODBUS通讯协议-Use of FIFO data structure, in 8051 to achieve full-duplex communications, realize MODBUS communication protocol
Date : 2025-12-22 Size : 5kb User : 余主恩
[SCM] fifo DL : 0: 一个同步FIFO，包括testbench，-A synchronous FIFO, including the testbench,
Date : 2025-12-22 Size : 1kb User : 张丰
[SCM] bulksrc DL : 0: 毕业课题部分程序： CY7C68013 Bulk IN 68013工作在AUTO IN模式，16位总线 SLAVE FIFO.MASTER是 ADI BF533。-Graduated from some of the procedures subject: CY7C68013 Bulk IN 68013 work in the AUTO IN mode, 16-bit bus SLAVE FIFO.MASTER is ADI BF533.
Date : 2025-12-22 Size : 54kb User : 张衡
[SCM] fifo DL : 0: 同步FIFO( Verilog HDL )-err
Date : 2025-12-22 Size : 3kb User : levis
[SCM] 1 DL : 0: 本设计采用Cypress公司支持USB2.0协议标准的EZ-USB FX2系列之CY7C68013芯片作为帧同步信号发送器的USB接口芯片，在uVision2开发环境下利用Keil C51完成了满足帧同步信号发送器基本要求的固件设计，具体采用了批量传输方式、大端点三缓冲设置、定时器中断方式的同步脉冲和数据的发送、软FIFO方式数据存放以及I2C总线下的LED显示等技术，最后协助编写USB底层驱动程序实现了固件自动下载。经过测试，所设计的帧同步信号发送器基本达到了课题所要求的基本原理性设计与验证。 -This design uses Cypress supports USB2.0 protocol standards of EZ-USB FX2 Series CY7C68013 chip as a frame synchronization signal transmitter of the USB interface chip, in uVision2 development environment using Keil C51 completed a frame synchronization signal to meet the basic requirements of transmitter firmware design, specific use of a bulk transfer mode, the endpoint buffer three settings, the timer interrupt the sync pulse and data transmission, soft FIFO mode and the I2C bus data repository under the LED display technology, assist in the preparation of the final bottom USB driver to achieve the firmware is automatically downloaded. After testing, the design of frame synchronization signal transmitter basic subjects required to achieve the basic principles of design and verification.
Date : 2025-12-22 Size : 589kb User : xmuyfng
[SCM] sin-genereter DL : 0: 首先，单片机计算出正弦波所需的ad转换数据，将此数据存入数组，然后将数据放入fifo，单片机只需读fifo，（将fifo设置成循环输出模式）就可得所需波形，另外，控制延时时间，即可控制频率。-First of all, single-chip microcomputer to calculate the required sine wave ad conversion data, this data into an array, and then the data Add fifo, Singlechip just read fifo, (will be set to cycle fifo output mode) can have waveform requirements, In addition, the control delay time, you can control the frequency.
Date : 2025-12-22 Size : 2kb User : 孙海波
[SCM] 20080402154056 DL : 0: 可以用的ＥＺ－ＵＳＢ控制器ＳＬＡＶＥ　ＦＩＦＯ　Ｃ＋＋程序-Can use the EZ-USB controller SLAVE FIFO C program
Date : 2025-12-22 Size : 139kb User : sxn
[SCM] FIFO DL : 0: FIFO中文应用笔记，对学习单片机RAM、大量数据处理很有帮助。-FIFO notes
Date : 2025-12-22 Size : 1.08mb User : chenlei
[SCM] FIFO-UART DL : 0: 基于ARM7-LM3S1138的FIFO方式的UART数据传输代码-ARM7-LM3S1138 based on the FIFO mode of UART data transmission code
Date : 2025-12-22 Size : 43kb User : Mr Zhang
[SCM] cy7c68013-Slave-FIFO DL : 0: cy7c68013 slave fifo fw
Date : 2025-12-22 Size : 17kb User : lgw21
[SCM] fifo DL : 0: 一个简单的FIFO实现，基于STM32的UART+DMA方式。(A simple FIFO implementation, based on the STM32 UART+DMA approach.)
Date : 2025-12-22 Size : 1kb User : 与众漫步
[SCM] OV7670+FIFO+3.0TFT DL : 0: ov7670 + FIFO原理，入门，简述，应用(Ov7670 + FIFO principle, introduction, brief description, application)
Date : 2025-12-22 Size : 10kb User : 18288292104
[SCM] 无FIFO摄像头 DMA传送 DL : 0: 该程序是使用了无fifo的7670摄像头，使用dma传输方式，能够稳定传输图像(The program uses a FIFO - free 7670 camera and uses DMA transmission to stabilize the transmission of the image)
Date : 2025-12-22 Size : 15.86mb User : tgy112
[SCM] （FIFO）串口接收和发送 DL : 0: 使用stm32的串口实现fifo队列缓冲读写数据，值得新手学习(Using STM32 serial port to realize FIFO queue buffer read and write data, it is worth learning by novice.)
Date : 2025-12-22 Size : 10.73mb User : feishen

« 12 3 4 5 6 7 8 »