Search - calibration

Search - calibration - List

[Com Port] W77E58code DL : 0: W77E58双串口通信源代码注：此源程序只作参考，内有些函数未有原型，借鉴在于其通信方式及其设置。 CRC检校可另参考其它代码。 -W77E58 dual serial communication source code Note : This program is for reference only, not some function prototype experiences in his means of communication and set up. CRC calibration can be a reference to other codes.
Date : 2008-10-13 Size : 6.28kb User : yanyan
[Com Port] FLA-502 DL : 0: FLA-502控制、标定、分析用，数据库版-FLA - 502 control, calibration, analysis, database version
Date : 2008-10-13 Size : 57.49kb User : 单大地
[Com Port] liuliangji DL : 1: 采用c#开以出对流量计的计算准确性进行标定,-used to come out of the calculation accuracy flowmeter calibration,
Date : 2008-10-13 Size : 7.93mb User : 曾经
[Com Port] W77E58的双串口通信源代码 DL : 0: 注：此源程序只作参考，内有些函数未有原型，借鉴在于其通信方式及其设置。 CRC检校可另参考其它代码。-Note : This only source for information, some not function prototype reference in its communications and its settings. CRC calibration can be a reference to the other code.
Date : 2008-10-13 Size : 2.26kb User : 张泽波
[Com Port] W77E58的双串口通信源代码 DL : 0: 注：此源程序只作参考，内有些函数未有原型，借鉴在于其通信方式及其设置。 CRC检校可另参考其它代码。-Note : This only source for information, some not function prototype reference in its communications and its settings. CRC calibration can be a reference to the other code.
Date : 2025-12-22 Size : 2kb User : 张泽波
[Com Port] W77E58code DL : 0: W77E58双串口通信源代码注：此源程序只作参考，内有些函数未有原型，借鉴在于其通信方式及其设置。 CRC检校可另参考其它代码。 -W77E58 dual serial communication source code Note : This program is for reference only, not some function prototype experiences in his means of communication and set up. CRC calibration can be a reference to other codes.
Date : 2025-12-22 Size : 6kb User : yanyan
[Com Port] FLA-502(Single) DL : 0: FLA-502控制、标定、分析用，单机版-FLA- 502 control, calibration, analysis, the single version
Date : 2025-12-22 Size : 46kb User : 单大地
[Com Port] FLA-502 DL : 0: FLA-502控制、标定、分析用，数据库版-FLA- 502 control, calibration, analysis, database version
Date : 2025-12-22 Size : 57kb User : 单大地
[Com Port] liuliangji DL : 0: 采用c#开以出对流量计的计算准确性进行标定,-used to come out of the calculation accuracy flowmeter calibration,
Date : 2025-12-22 Size : 10.14mb User : 曾经
[Com Port] 1 DL : 0: 反汇编反出的51串口通讯“波特率自动校准技术-Disassembly of the 51 anti-Serial Communication baud rate auto-calibration technology
Date : 2025-12-22 Size : 2kb User : 李群燕
[Com Port] Compass_Calibration DL : 0: 这是一个罗盘的串口数据读取过程,并且在此之前加入了标定过程-This is a compass to read the serial data process and in this process by adding a calibration
Date : 2025-12-22 Size : 509kb User : duanwei
[Com Port] liao6882best DL : 0: 在Delphi 環境下編寫的串口調試程序 ,能與下位機(MSP430F147)實現串口485通訊.完成對下位機狀態的檢測.校準. 對於使用Delphi的串口編程有一定的作用.-Delphi environment at the serial debugger prepared, with the next-bit machine (MSP430F147) achieve 485 serial communications. Achieve status for the next-bit test machine. Calibration. For the use of Delphi s serial port must have the role of programming.
Date : 2025-12-22 Size : 357kb User : 廖001
[Com Port] modbus-2 DL : 0: Modbus通信协议的详细介绍，包括MODBUS ASCII和MODBUS RTU协议的详细格式说明，校验方法等-Modbus communication protocol in detail, including MODBUS RTU and MODBUS ASCII protocol format of the detailed description, calibration methods
Date : 2025-12-22 Size : 94kb User : owenbbkp
[Com Port] Run_time_calibration_of_the_internal_RC_oscillator DL : 0: 如何通过UART来校准内部RC振荡器。这种方法是基于LIN协议上使用的方法。-Run-time calibration of the internal RC oscillator (19 pages, revision A, updated 09/04) This application note describes how to calibrate the internal RC oscillator via the UART. The method used is based on the calibration method used in the Local Interconnect Network (LIN) protocol.
Date : 2025-12-22 Size : 536kb User : ECN
[Com Port] DUT DL : 0: DUT系列数据采集模块将温度传感器（热电阻，热电偶等）的输出信号或电流、电压直接转换成数字量，通过RS-485总线及标准通信协议将数据传送给主机。在模块上由89C51单片机管理模块自动工作，通道转换、ADC启动、采集数据、参比端补偿（热电偶）、引线电阻补偿（热电阻）、数字校零、非线性校正和数据处理等，均由单片机完成，主机仅在需要数据时，发送读取数据命令，模块给出已经线性化了的温度的数字量。通讯协议兼容台湾研华ADAM4000系列和松下PLC的通讯协议，可以与大多数组态软件直接连接，不需要额外的驱动程序，技术人员不需要有温度检测专门知识和编程能力即可使用。本产品主要用于各种现场的数据采集和控制系统。-DUT Series data acquisition module temperature sensor (RTD, thermocouples) De Shuchuxinhao or the current, voltage directly into Shuzi amount, via RS-485 bus, and data transfer standard communication agreement Ji Zhu Ji. 89C51 microcontroller in the module by the management module automatically, channel conversion, ADC start, collecting data, reference junction compensation (TC), lead resistance compensation (thermal resistance), digital calibration, linear calibration and data processing by the MCU to complete, the host only needs the data to send read data command, the module has been given a linear temperature of the digital. Communication protocol compatible with Advantech ADAM4000 series and the Panasonic PLC s communication protocol, can be directly connected with most of the configuration software, no additional drivers, technicians do not have temperature sensing capabilities and programming expertise to use. This product is mainly used for a variety of field data acquisition a
Date : 2025-12-22 Size : 3.38mb User : 刘学伟
[Com Port] Calibration DL : 0: 实现了串口通讯功能，包括发送命令，接收数据等-Implement serial communications, including sending commands, receiving data, etc.
Date : 2025-12-22 Size : 34kb User : djy
[Com Port] the-source-code-of-electronic-scale DL : 0: （1）初始化定时器与中断控制寄存器，初始化液晶显示器，设置串口通信波特率。（2）启动双积分AD转换过程，循环读取反向积分的计数值N，根据式3-7算出反向积分的计时值T2，换算出荷载重量值，送LCD显示。（3）每次换算出荷载重量值后，判断荷载是否超量程，如果超过系统量程2kg，则启动蜂鸣器报警。当荷载卸载至2kg以下后，解除报警。（4）如果有校准按键被按下，则响应外部中断0并查询按键编号，执行相应校准程序。（5）如果上位机软件STP_ISP发送了在线控制命令，则响应串口中断，接收并判断命令码，依据命令码执行校准程序并向上位机发送数据。 -(1) initial timer and interrupt control register, the initial LCD monitor, set the serial interface communication baud rate. (2) start double integral AD transform process, read backward integration project cycle numerical N, according to type 3-7 calculate backward integration project duration T2, conversion, send out load weight value LCD display. (3) every time a load weight after conversion value judgment, whether the measure range, load if more than 2 kg range, the system buzzer alarm. Start When load unloading to 2 kg, remove the alarm. (4) if there is calibration button is press, the response to external interruption and inquires the key Numbers, 0 executes calibration procedures. (5) if PC software STP_ISP send the online control command, the response, receiving and serial port interrupt judge ordered code, according to perform calibration procedures and command yards up a machine to send data.
Date : 2025-12-22 Size : 5kb User : ahuan
[Com Port] electronic-scale DL : 0: （1）初始化定时器与中断控制寄存器，初始化液晶显示器，设置串口通信波特率。（2）启动双积分AD转换过程，循环读取反向积分的计数值N，根据式3-7算出反向积分的计时值T2，换算出荷载重量值，送LCD显示。（3）每次换算出荷载重量值后，判断荷载是否超量程，如果超过系统量程2kg，则启动蜂鸣器报警。当荷载卸载至2kg以下后，解除报警。（4）如果有校准按键被按下，则响应外部中断0并查询按键编号，执行相应校准程序。（5）如果上位机软件STP_ISP发送了在线控制命令，则响应串口中断，接收并判断命令码，依据命令码执行校准程序并向上位机发送数据。 -(1) initial timer and interrupt control register, the initial LCD monitor, set the serial interface communication baud rate. (2) start double integral AD transform process, read backward integration project cycle numerical N, according to type 3-7 calculate backward integration project duration T2, conversion, send out load weight value LCD display. (3) every time a load weight after conversion value judgment, whether the measure range, load if more than 2 kg range, the system buzzer alarm. Start When load unloading to 2 kg, remove the alarm. (4) if there is calibration button is press, the response to external interruption and inquires the key Numbers, 0 executes calibration procedures. (5) if PC software STP_ISP send the online control command, the response, receiving and serial port interrupt judge ordered code, according to perform calibration procedures and command yards up a machine to send data.
Date : 2025-12-22 Size : 5kb User : ahuan
[Com Port] VB6Serial-communication DL : 0: VB串口通讯，里面有CRC校验程序，难得见到的程序。-VB serial communication, there are CRC calibration procedures, see the procedure.
Date : 2025-12-22 Size : 21kb User : 赵晓春
[Com Port] timer DL : 0: 用delphi 写的时间校准小程序，从计算机读取时间再通过串口发送给下位机，可以学习串口编程，带系统托盘-Time calibration with delphi write small programs to read the time from the computer through the serial port and then sent to the next crew, can learn with serial ports, with the system tray
Date : 2025-12-22 Size : 505kb User : 李俊

« 12 »