Location:
Search - uart.c I
Search list
Description: 8051 Serial I/O Routines Ring buffered, interrupt-driven UART driver, written in Keil C .
Platform: |
Size: 12655 |
Author: buaalzx |
Hits:
Description: C51 DOS/WINDOWS下的MCS51系列串行口（UART）的C驱动程序-C51 DOS / Windows under the MCS51 serial I (UART) C driver
Platform: |
Size: 1648 |
Author: WANGXIAN |
Hits:
Description: 8051 Serial I/O Routines Ring buffered, interrupt-driven UART driver, written in Keil C .
Platform: |
Size: 12288 |
Author: buaalzx |
Hits:
Description: 5 ledblink -- 跑马灯程序
该项目在SDT2.51下编译调试。最简单的demo程序，运行后3个发光二极管轮流点亮。
6 timerint -- 定时器中断demo程序
该项目在SDT2.51下编译调试。将子目录timerint拷贝到c:\ 下。
该demo程序的主程序是while空循环，定时器中断服务程序每500ms将3个LED反相。
在57600超级终端里也可以看到中断发生时的信息。
7 uart -- 串口测试程序
该项目在SDT2.51下编译调试。运行后在57600的超级终端里等待PC键盘的输入，当按下 a 或 b 或 c 按键时，超级终端里将显示 You Pressed a ,You Pressed b ,You Pressed c .
-5 ledblink-- 5,250 procedures for the project under the Build SDT2.51 debugging. The most simple demo, the running after three LED lights rotation. 6 timerint-- timer interruption demo procedures of the project under the Build SDT2.51 debugging. Will subdirectory timerint copy of the c : \ under. The demo procedures while the main program is empty circle, the timer interruption of services in each of 500ms to RP-3 LED. The Super Terminal Lane 57600 can be seen at the time of the interruption information. 7 UART-- Serial testing procedures of the project under the Build SDT2.51 debugging. After running in the Super Terminal 57,600 awaiting the PC keyboard input, or when pressing a button b or c, Super Terminal Lane will be a show Pressed You, You Pressed b, You Pressed c.
Platform: |
Size: 249856 |
Author: 张淼林 |
Hits:
Description: MSP430与dsp接口技术1,编辑环境C语言,我运行过,好-MSP430 interface technology with a dsp, edit C language environment, I run off, good Dongdong
Platform: |
Size: 680960 |
Author: 王方 |
Hits:
Description: C51 DOS/WINDOWS下的MCS51系列串行口（UART）的C驱动程序-C51 DOS/Windows under the MCS51 serial I (UART) C driver
Platform: |
Size: 1024 |
Author: WANGXIAN |
Hits:
Description: 51用C编写的io口模拟串口收发程序代码-51 C io I prepared the simulation code Serial Transceivers
Platform: |
Size: 1024 |
Author: njgwx |
Hits:
Description: 在一些应用中，经常要用到双串口，但是一般单片机只提供一个串口，其实完全可以用普通I/O口模拟一个串口。这里介绍一个用AVR单片机模拟的串口程序.-in some applications, the regular use of the dual serial port, but most only provide a microcontroller serial, In fact, the general can use I/O simulation of a serial mouth. Here on a simulation using AVR Serial procedures.
Platform: |
Size: 2048 |
Author: ECN |
Hits:
Description: 這是一個用keil C在8051上開發實作的UART程式，本人認為很適合剛接觸8051的學習者，很有幫助的。 -This is a use keil C in 8051 to develop programs to implement the UART, I think 8051 is very suitable刚接触learners, very helpful.
Platform: |
Size: 14336 |
Author: 王耿良 |
Hits:
Description: uCos-ii 2.86 在C8051F410单片机上移植成功!!! 其中包括:UART驱动，smaRTClock驱动等。在keil中可通过模拟仿真查看移植运行结果，另在文件中附有本人实际运行的结果图片。本人保证:所有经本人上传的程序绝对可以正常使用！-uCos-ii 2.86 at C8051F410 Singlechip Successful transplantation on!!! including: UART driver, smaRTClock driving. Keil at through simulation can be run to view the results of transplantation, and the other in the document with the actual running of the results of my picture. I guarantee: I upload all the procedures can absolutely normal use!
Platform: |
Size: 536576 |
Author: XIAFAC |
Hits:
Description: 语言为C语言，开发环境为IAR.ZigBee2004协议UART0中断的源码程序，加了部分注释。-Language for C language development environment for the UART0 interrupt IAR.ZigBee2004 source protocol procedures, add some comments.
Platform: |
Size: 750592 |
Author: 郭宇峰 |
Hits:
Description: Robosapien_IR.zip contains source files, PCB + Schematic and IR codes specification. The design is based on 8051 core mcu (I use P89C668 in my build), only minor modification needed with other brands of mcu. The board receive command code from serial (uart) and generate IR code send out via onboard IR transmitter. You can use any C compiler to create and send command from PC or PDA, I m using LabVIEW for this part of application. Drop me email if you have questions or if you like to have the LabVIEW code, my LabVIEW code is running on Version 8.5. Cheers.-Robosapien_IR.zip contains source files, PCB+ Schematic and IR codes specification. The design is based on 8051 core mcu (I use P89C668 in my build), only minor modification needed with other brands of mcu. The board receive command code from serial (uart) and generate IR code send out via onboard IR transmitter. You can use any C compiler to create and send command from PC or PDA, I m using LabVIEW for this part of application. Drop me email if you have questions or if you like to have the LabVIEW code, my LabVIEW code is running on Version 8.5. Cheers.
Platform: |
Size: 95232 |
Author: David |
Hits:
Description: mega8 mcu ，iccavr ，c program ，int0 int1 ，ADC ，uart，i/o
Platform: |
Size: 3072 |
Author: nihuanhuan |
Hits:
Description: 关于STM8S单片机的串口C程序，里面有详细调试步骤说明-about STM8S mirocontroller UART C Program
Platform: |
Size: 77824 |
Author: |
Hits:
Description: FT2232L DUAL USB UART/FIFO I.C. FLASH TOOL
Platform: |
Size: 7168 |
Author: LinTong |
Hits:
Description: Hydrogen/C51 是一个用于51的非占先操作系统 基本上用纯 C 实现, 嵌入了大概10行的汇编
基本需求:
1.最小编译代码大概在 2.4k
2.需要使用片外的 xdata 作为堆使用
3.占用 TIMER0 作为计时
使用基本要求:
1.任务中必需要存在 Sleep/WaitFor 函数才能主动放弃占用CPU
2.任务入口和使用到Sleep/WaitFor的函数必需是 reentrant.
内核功能:
1.动态建立任务
2.支持事件/阻塞/信号量,临界
3.全双工串口(中断实现), IO过程中不会阻塞其它任务
4.UNIX c 风格的读写流(read/write)
5.一个简单的基于 24C 的文件系统(不支持目录)
-Hydrogen/Core51 is a Keil C51 None-Preemptive OS. CORE written by Pure C (well..almost Pure, has 10 lines inline ASM).
CORE minimal resource
**Size about 2.3~5K ROM, 20+ Byte RAM. it is depends modules your chosen.
**CORE also TAKE TIMER0 to tick for real-timing, and need xdata for HEAP
CORE Support
**dynamic Create/Terminate Thread(TASK)
**Synchronize Object (Event/Semaphore/Critical Section), Thread(TASK) Naturally GIVES UP CPU by WaitFor these Synchronize Object
**Common IO, it is STD C open/read/write in Any Stream Like IO(I2C, UART etc.)
I host this project for OS studying, and Also Used in my work.
SRC can be download from SVN Repository
Platform: |
Size: 3266560 |
Author: binary |
Hits:
Description: Some example about programs to microcontroller. The programation is in languaje C. Some programs are very easy to understand, others is about to use the serial comunication like UART. And I added a program with ADC, you only need built the circuit with some potenciometer or something like that. All of them are project of Mikroc, but you can open them with other compiler.-Some example about programs to microcontroller. The programation is in languaje C. Some programs are very easy to understand, others is about to use the serial comunication like UART. And I added a program with ADC, you only need built the circuit with some potenciometer or something like that. All of them are project of Mikroc, but you can open them with other compiler.
Platform: |
Size: 818176 |
Author: PIGA |
Hits:
Description: 本代码用verilog语言配合sopc和nios实现了串口调试的目的。软件编程用C语言描述，只是比较简单的例子，适合初学者做了解用，本人亲自在EP2C8Q上实践。-The code to use verilog language sopc and nios achieved with serial debugging purposes. Software programming using C language description, but relatively simple example for beginners to do with understanding, I personally EP2C8Q on practice.
Platform: |
Size: 17866752 |
Author: 普尔 |
Hits:
Description: mega8 mcu ，iccavr ，c program ，int0 int1 ，ADC ，uart，i/o
Platform: |
Size: 3072 |
Author: htmon |
Hits:
Description: msp430的uart模块收发程序，其中包括uart.h,uart.c文件，经本人亲测,程序可以使用。程序还有波特率设置函数，很好用。-The transceiver module uart msp430 procedures, including uart.h, uart.c file, the I pro-test, the program can be used. Program as well as the baud rate setting function, easy to use.
Platform: |
Size: 21504 |
Author: 留忆 |
Hits: