Location:
Search - wince5.0 sd
Search list
Description: PXA270 下用SD卡启动的代码,已在wince5.0的mainstoneii下测试通过
-PXA270 using SD card-activated code in the mainstoneii wince5.0 under the test
Platform: |
Size: 6698 |
Author: PengFei |
Hits:
Description: 利用EVC编写一个可运行于Wince5.0的应用程序，该应用程序利用S3C2410微控制器的SD/MMC卡驱动，在SC/MMC卡上创建一个文本文件，并往文件里添加文字，再读出来校验。
Platform: |
Size: 45782 |
Author: 杜一 |
Hits:
Description: 支持WINCE5.0 SD卡无线网卡,在SAMSUNG 2440 上测试通过
Platform: |
Size: 1002 |
Author: helijia |
Hits:
Description: PXA270 下用SD卡启动的代码,已在wince5.0的mainstoneii下测试通过
-PXA270 using SD card-activated code in the mainstoneii wince5.0 under the test
Platform: |
Size: 6144 |
Author: PengFei |
Hits:
Description: WinCE5.0 ,SDHC dirver for pxa27x-WinCE5.0, SDHC dirver for pxa27x
Platform: |
Size: 90112 |
Author: 张振军 |
Hits:
Description: 利用EVC编写一个可运行于Wince5.0的应用程序，该应用程序利用S3C2410微控制器的SD/MMC卡驱动，在SC/MMC卡上创建一个文本文件，并往文件里添加文字，再读出来校验。-The use of EVC in the preparation of a run Wince5.0 applications, the application S3C2410 microcontroller using SD/MMC card driver, in the SC/MMC card to create a text file, and add to the document text, read out Check.
Platform: |
Size: 45056 |
Author: 杜一 |
Hits:
Description: S3C2440开发板 WinCE5.0触摸屏驱动程序源代码
，很有参考价值-S3C2440 development board WinCE5.0 touchscreen driver source code, useful reference
Platform: |
Size: 70656 |
Author: 小贾 |
Hits:
Description: wince5.0 下，用于获取sdcard 的 ID.
用c++ 开发，vs2005 -wince5.0 used for sdcard access to the ID. with c++ development, vs2005
Platform: |
Size: 43008 |
Author: hugohong |
Hits:
Description: 说明：
GR(M)-87目前只能应用于WINCE5.0版本中，其它版本用不了。
1.该软件是用来检测GPS的COM以及GPS信号的软件，应用广泛
2.mGpsCmd是PPC(WINCE系统)用的，GpsViewer 1.5是PC和PPC的安装程序，考到SD卡上就可以直接用！
用法1：搜索COM口，连上GPS，点SCAN，如果提示找到FOUNDGPS，那么就是对应的COM口
3..在WINDOWS XP/2000系统使用，安装USB_driver -V2.1.0.exe 驱动程序，串口也通用。
4.安装GpsViewer 1.5.exe。安装完后，打开进入界面，COM Port 不用选择，会自动扫描，见GPS1的图片；Baudrate：4800.
然后按Scan...进行扫描到串口后，再按Open GPS,即可会自动找到卫星，从图上或下面的显示可以看到。见GPS2图片。
5.GPS天线必须放在室外才有效。
6.GpsViewer， mGpsCmd软件不会自动刷新，请一会按下最小化，一会再点弹出来，手动刷新。
-Description:
GR (M)-87 are currently only applies to WINCE5.0 version, other versions of few.
1. The software is used to detect the GPS signal COM and GPS software, a wide range of applications
2.mGpsCmd are PPC (WINCE system) used, GpsViewer 1.5 is a PC and PPC installation procedures, test the SD card can be used directly!
Usage 1: Search COM port, even on the GPS, point SCAN, if prompted to find FOUNDGPS, so is the corresponding COM port
3 .. WINDOWS XP/2000 systems in use, the installation USB_driver-V2.1.0.exe driver, serial port is also common.
4. Installation GpsViewer 1.5.exe. After installation, open access to the interface, COM Port do not have choice, will automatically scan, GPS1 see the picture Baudrate: 4800.
Then press Scan ... after the scan to the serial port, and then Open GPS, you will automatically find the satellites, or from the map display can be seen below. GPS2 see picture.
Outdoor antenna must be placed on 5.GPS
Platform: |
Size: 3700736 |
Author: avr001 |
Hits:
Description: WincE 5.0模拟器，可用于在Windows下模拟WincE里的程序。-WincE 5.0 simulator, can be used to simulate WincE where Windows programs.
Platform: |
Size: 12163072 |
Author: smallhill |
Hits:
Description: Wince5.0/6.0上电子书的阅读，可以读取SD卡中的文件。-Wince5.0/6.0 on reading, can read the ebook SD card of files.
Platform: |
Size: 3741696 |
Author: Zhyy |
Hits:
Description: WINCE5.0下的sd卡驱动，硬件平台为xscal的pxa270-WINCE5.0 under the sd card driver, the hardware platform xscal of pxa270
Platform: |
Size: 5120 |
Author: 赵海峰 |
Hits:
Description: script for internet WINCE5
Platform: |
Size: 3072 |
Author: Alex |
Hits:
Description: wince5.0 获取SD卡的id，对开发wince手持系统非常有帮助-wince5.0 idwince5.0 get access to SD card SD card SD card to get the id idwince5.0
Platform: |
Size: 31744 |
Author: 曹新日 |
Hits:
Description: wince 5.0/S3C2440 下用串口传文件后写SD卡 相关技术有： 内存映射 读写SD卡 系统自动重启-wince 5.0/S3C2440 with serial transfer files to write SD card technology: memory-mapped SD card reader system automatically restart
Platform: |
Size: 4574208 |
Author: heyi |
Hits:
Description: PXA270 下用SD卡启动的代码,已在wince5.0的mainstoneii下测试通过-PXA270 under SD card startup code has been tested under wince5.0 the mainstoneii
Platform: |
Size: 7168 |
Author: 陈日成 |
Hits:
Description: DMC-9263-E采用基于ARM926EJ-S内核的ATMEL处理器AT91SAM9263, 运行频率200MHz。板载64MB的SDRAM，64MB的Nand Flash，2MB的Data Flash。DMC-9263-E嵌入式开发系统外设非常丰富，功能强大，可扩展性强，低功耗。适用于纺织行业、数控行业、汽车电子、工业触摸屏控制系统、机器人视觉、媒体处理无线应用、数字家电、车载设备、通信设备、网络终端等场合。支持嵌入式Linux和WINCE5.0操作系统。
采用Linux2.6.20内核，LINUX驱动支持：AUDIO、VGA、USB HOST、以太网、CAN、LCD 和触摸屏、IDE、SD卡、CF卡、串口等，支持QT。
WINCE5.0测试程序：蜂鸣器、GPIO、KEY、RS232等,并提供WINCE完整的镜像文件
-DMC-9263-E using the ARM926EJ-S core ATMEL processor based on AT91SAM9263, the operating frequency of 200MHz. On board 64MB SDRAM, 64MB Nand Flash, 2MB Data Flash. The DMC-9263-E embedded development system peripherals is very rich, powerful, extensible, low power. Is suitable for the textile industry, the CNC industry, automotive electronics, industrial touch screen control system, robot vision, media processing wireless application, digital home appliances, vehicle equipment, communication equipment, network terminal and other occasions. Support Linux and embedded WINCE5.0 operating system.
Platform: |
Size: 29696 |
Author: 龙芯 |
Hits:
Description: DMC-2440-H采用基于ARM920T内核的Samsung处理器 S3C2440A, 标准主频400MHz，最高主频可达533MHz。采用64MB的SDRAM，2MB的NOR FLASH和64MB的NAND Flash。DMC-2440-H嵌入式开发系统外设非常丰富，功能强大，适用于各种手持设备、消费电子和工业控制设备的开发。支持嵌入式Linux和WINCE5.0.NET操作系统。
采用Linux -2.6.134内核，LINUX驱动支持：DM9000 网卡、串口、RTC、LED、按键、触摸屏、USB鼠标和键盘、SD/MMC 卡、Nand Flash、UDA1341 音频、LCD、优盘、USB 摄像头。支持QT, 支持MP3播放和视频播放。
WINCE5.0驱动支持：LCD、DM9000、按键、LED、NandFlash、串口、触摸屏、USB host & slave、音频等。
测试程序（ADS1.2项目文件）：RTC、ADC、key、Touchpanel、LCD、VGA、EEPROM、UDA1341、SD Card、CMOS Camera等。-DMC-2440-H based on ARM920T core Samsung processor S3C2440A, standard frequency of 400MHz, the highest frequency is 533MHz. Using 64MB SDRAM, 2MB NOR FLASH and 64MB NAND Flash. The DMC-2440-H embedded development system peripherals is very rich, powerful, suitable for development in various handheld devices, consumer electronics and industrial control equipment. Support Linux and embedded WINCE5.0.NET operating system.
Platform: |
Size: 28672 |
Author: 龙芯 |
Hits:
Description: DMC-2440-I采用基于ARM920T内核的Samsung处理器 S3C2440A, 标准主频400MHz，最高主频可达533MHz。板载64MB的SDRAM，128MB的Nand Flash以及2MB的Nor Flash。DMC-2440-I是根据S3C2440A的全部功能而开发的全功能嵌入式系统。具有外接资源丰富，性能稳定，低功耗低等特点。适合手持设备的设计开发。支持嵌入式Linux和WINCE5.0.NET操作系统。提供Wince5.0 BSP。
采用linux-2.6.29 内核,驱动支持：DM9000、各种真彩液晶、音频输入输出、触摸屏、支持高速大容量的SD 卡、RTC、看门狗、三个串口、万能USB 摄像头、鼠标和键盘、U盘,支持QT。
Wince5.0驱动支持：ATA硬盘、camera 、CS8900网口、LCD、 DM9000网口、 IIC、 Key 、LED、串口、SDHC卡、触摸屏、USB 、AC97音频、IIS等。
测试程序(ADS1.2项目文件)：中断方式按键、RTC 实时时钟、ADC 数模转换、IIS 音频播放wav、IIS 音频录音、触摸屏、I2C 总线读写AT24C08、三星3.5”LCD、640x480 真彩液晶等。-DMC- 2440- I Samsung processor S3C2440A based on ARM920T kernel, standard frequency 400 MHZ, the highest frequency of up to 533 MHZ. Onboard 64 MB SDRAM, 128 MB Nand Flash and 2 MB of Nor Flash. The DMC- 2440- I was based on S3C2440A all of the features and the development of a fully functional embedded systems. Has the rich external resources, stable performance, low power consumption is low. Design and development for handheld devices. Support the embedded Linux operating system and WINCE5.0.NET. Provide Wince5.0 BSP.
The Linux- 2.6.29 kernel driver support: DM9000, all kinds of true color LCD, touch screen, audio input and output, support high speed large capacity of the SD card, RTC, watchdog, three serial ports, universal USB camera, mouse and keyboard, U disk, support QT.
Wince5.0 driver support: ATA hard disk, camera, CS8900 front-end ports, LCD, DM9000 front-end ports, IIC, keys and leds, serial ports, SDHC CARDS, touch screen, USB, AC97 audio, IIS, etc.
Test program (ADS1.2
Platform: |
Size: 29696 |
Author: 龙芯 |
Hits:
Description: DMC-2440-G采用一款基于ARM920T 内核的CPU S3C2440A-40构成一个完整的嵌入式系统开发平台。S3C2440A-40主频达到400MHZ，提供64M的SDRAM和256M的NAND FLASH，以及丰富的外设接口。该平台适用于GPS，PDA，MID，移动电视，智能手机，手持设备，平板电脑和广告机等消费类电子产品以及工业控制等领域。支持LINUX2.6和WinCE5.0操作系统。
WinCE5.0驱动支持：IDE/ATA， IIC，USB 摄像头,SD卡, USB 无线网卡,串口，网卡，实时时钟，USB Host，显示，触摸屏，CMOS摄像头，LED，按键，ADC,GPS接收等,支持mediaplay播放器。-DMC- 2440- G by a CPU S3C2440A based on ARM920T kernel- 40 constitute a complete embedded system development platform. S3C2440A- 40 frequency of 400 MHZ, 64 MB NAND FLASH, SDRAM and 256 m and rich peripheral interfaces. The platform is suitable for GPS, PDA, MID, mobile TV, smart phones, handheld devices, tablets and advertising machine and other consumer electronics and industrial control, etc. Support there and WinCE5.0 operating system.
WinCE5.0 driver support: IDE/ATA, IIC, USB camera, SD card, USB wireless network card, a serial port, network CARDS, real-time clock, USB Host, display, touch screen, CMOS camera, LED, buttons, ADC, GPS receiving, etc., to support the mediaplay player.
Platform: |
Size: 35840 |
Author: 龙芯 |
Hits: