Location:
Search - stm32f103 t
Search list
Description: stm32f103开发板
tim定时器例程-stm32f103 development board tim timer routines
Platform: |
Size: 83968 |
Author: snowman |
Hits:
Description: 基于stm32f103系列的直接内存存储方式的多种波形发生器，能产生正弦波、方波、三角波、锯齿波、T形波，其频率幅度可调-Based stm32f103 series of direct memory storage of a variety of waveform generator can produce sine, square, triangle wave, sawtooth wave, T-wave, the frequency amplitude adjustable
Platform: |
Size: 4311040 |
Author: 甘育仪 |
Hits:
Description: 基于STM32F103的ADC1多通道实验，非DMA方式，亲测有效，此文件只配置了3路AD同时输入，有需要的朋友可以通过此文件更改IO口配置，实现更多的ADC通道 -Based on STM32F103 ADC1 multi-channel experiment that haven t used DMA, this file is configured with only 3 way AD input at the same time, if any friend in need can be modified by this file IO port configuration, achieve more ADC channels
Platform: |
Size: 6847488 |
Author: xiewensheng |
Hits:
Description: 这是按照前面我发的从零开始学习ucosii手册，编写成功的模板。芯片是stm32f103c8t6，移植在f103芯片上，都是同理可得。记住虽然可以直接拿着用，但是要修改对应的IO口哦，程序效果是led小灯闪烁。（有一个问题我也不太清楚，理论上c8t6的启动文件应该是startup_stm32f10x_md.s，但是用它却不能成功。用startup_stm32f10x_hd.s却成功了。）(This is a successful template written in front of the uCOSII manual that I started from zero. The chip is stm32f103c8t6, and the transplant is on the F103 chip. Remember that although it can be used directly, but to modify the corresponding IO mouth Oh, the program effect is the LED light flicker. (there is one problem I'm not very clear about. In theory, c8t6's startup file should be startup_stm32f10x_md.s, but it can't be successful with it. It was successful with startup_stm32f10x_hd.s.))
Platform: |
Size: 1000448 |
Author: 悲天名人 |
Hits:
Description: 说明： AURIX单片机demo程序和例程，可以直接在例程的基础上进行修改就好了
(the demo of chip of AURIX)(he demo of chip of AURIX this is a piece of sh t)
Platform: |
Size: 49152 |
Author: 徐根宝 |
Hits:
Description: 使用STM32F103实现ADAU1452的自启动和安全加载，有I2C和SPI两种方式
这个例程是基于淘宝买的ADAU1452开发板和配套的STM32F103控制板，没有板子也不要紧，这里主要是实现SPI和I2C对ADI芯片的加载，参考为主。
ADAU使用SigmaStudio4.5
STM32使用STM32CubeIDE 1.3.0(Using STM32F103 to realize the self starting and safe loading of adau1452, there are two ways: I2C and SPI
This routine is based on Taobao's adau1452 development board and the supporting STM32F103 control board. It doesn't matter if there is no board. Here is mainly to realize the loading of SPI and I2C on ADI chip, mainly for reference.
ADAU uses sigma studio 4.5
STM32 uses stm32cube ide 1.3.0)
Platform: |
Size: 42937344 |
Author: 银天蓝 |
Hits: