Location:
Search - s3c44b0-key
Search list
Description: 在S3C44B0上实现的键盘和LED驱动程序，其关键是使用了系统定时器来提高效率。此代码依赖于硬件的GPIO接口，但只需按照实际稍微改动即可。-S3C44B0 in achieving the keyboard and LED driver, The key is to use a timer system to improve efficiency. This code depends on the hardware GPIO interface, but only in accordance with the actual changes will be slight.
Platform: |
Size: 7722 |
Author: 陈器 |
Hits:
Description: 该代码是基于Ｓ３Ｃ４４Ｂ０的键盘测试代码
该代码采用查询的方式来检测由外部产生的键盘信号．-The code is based on the keyboard S3C44B0 test code using the code the way to inquiries by external detection the keyboard signal.
Platform: |
Size: 98075 |
Author: feiyang |
Hits:
Description: ４４b0和linux操作系统下的按键中断驱动程序
Platform: |
Size: 1333 |
Author: xj216 |
Hits:
Description: 这是三星arm s3c44b0x开发板上的一些实例程序，包括lcd，led，key，pwm，uart等-arm s3c44b0x development board some examples of procedures, including LCD, led, key, PWM, UART, etc.
Platform: |
Size: 779264 |
Author: cguo |
Hits:
Description: 主要从几个关键主题描述S3C44B0X VxWorks BSP定制工作， 对整个过程作了详细描述。另外提供一些开发中需要使用的参考资源，包括手册、文档、代码和工具等-mainly from several key themes described S3C44B0X VxWorks BSP customization, the entire process was described in detail. Provide some additional development need to use the reference resources, including manuals, documentation, code and tools
Platform: |
Size: 208896 |
Author: wohulf |
Hits:
Description: 在S3C44B0上实现的键盘和LED驱动程序，其关键是使用了系统定时器来提高效率。此代码依赖于硬件的GPIO接口，但只需按照实际稍微改动即可。-S3C44B0 in achieving the keyboard and LED driver, The key is to use a timer system to improve efficiency. This code depends on the hardware GPIO interface, but only in accordance with the actual changes will be slight.
Platform: |
Size: 7168 |
Author: 陈器 |
Hits:
Description: 该代码是基于Ｓ３Ｃ４４Ｂ０的键盘测试代码
该代码采用查询的方式来检测由外部产生的键盘信号．-The code is based on the keyboard S3C44B0 test code using the code the way to inquiries by external detection the keyboard signal.
Platform: |
Size: 98304 |
Author: feiyang |
Hits:
Description: ４４b0和linux操作系统下的按键中断驱动程序-44b0 and linux operating system interrupt key driver
Platform: |
Size: 1024 |
Author: xj216 |
Hits:
Description: 7279在MSP430上的驱动，包含演示程序:
当有按键按下时,430进入中断读取键值,显示在LED数码管上-7279 in the MSP430 on the drive, including the demo program: When there is a button press when the interruption 430 into the read key, displayed on the LED digital tube
Platform: |
Size: 20480 |
Author: 江枫 |
Hits:
Description: 对ARM而言，初始化的配置是你是否掌握它的关键，它是主程序能否工作的基础。它要你掌握ARM的汇编，CPU的中断处理，硬件的结构等。本实验的目的就是一步一步教你完成S3C44B0的初试化配置，顺利进入C程序。-On the ARM, the initialization of the configuration is whether you have the key to it, it is the main program can work. It want you to grasp the ARM compilation, CPU
Platform: |
Size: 1430528 |
Author: 石云 |
Hits:
Description: SDT2.5,S3C44B0的测试程序，可以参考，本人没有开发板，可以下个Proteus7.01玩玩，不过，只有飞利浦的有-SDT2.5, S3C44B0 test procedures, can refer to, I do not development board, you can Proteus7.01 next play, however, there is only Philips
Platform: |
Size: 73728 |
Author: huhaobo |
Hits:
Description: 这是一个基于硬件平台s3c44B0和操作系统为ucos的矩阵键盘的程序，可以移植到自己的系统中。-This is a hardware-based platform and operating system for uCOS S3C44B0 matrix keyboard procedures, can be transferred to your system.
Platform: |
Size: 2048 |
Author: 叶新栋 |
Hits:
Description: 基于S3C44b0的键盘LED接口设计，芯片采用zlg7290，利用了ucos的消息邮箱传递键盘输入，其中zl7290的驱动采用分层设计的方法，上层I2C函数和底层具体操作函数分离，方便移植和更换键盘芯片。-key/led interface based on S3C44b0 with zlg7290 using I2C protocol.level code for porting
Platform: |
Size: 623616 |
Author: xuxi |
Hits:
Description: 按键控制程序，基于三星的ARM7内核S3C44B0源程序-Key control procedures, based on Samsung' s ARM7 kernel source S3C44B0
Platform: |
Size: 133120 |
Author: 张飞 |
Hits:
Description: 用s3c44b0实现320240LCD(比一般小)点亮,并有键盘功能-s3c44b0 LCD
Platform: |
Size: 2412544 |
Author: koby |
Hits:
Description: S3C44B0的ARM7移值好的UCOS-II的工程，包括3个文件，其中有带中断例程的，带按键检测的-S3C44B0 the ARM7 transplant good UCOS-II project, including the three documents, including with interrupt routines, with key detection
Platform: |
Size: 493568 |
Author: 89u8 |
Hits:
Description: S3C44B0 按键控制LED 初学嵌入式-Key Control LED novice embedded S3C44B0
Platform: |
Size: 91136 |
Author: xch |
Hits:
Description: 该工程编译工具是ADS1.2，开发板是S3C44b0x，主要实现功能模块是按键检测部分，其他模块是辅助功能，可供初学者参考。最近在学习ARM的S3C44b0开发板，网上很多的源码下载后不能正确的运行的ADS环境下，故上传各分模块供参考！-The project build tool is ADS1.2, development board is S3C44b0x, the main achievement of key detection function module is part of the auxiliary functions of other modules. Recent study of S3C44b0 ARM development board, download the source code line number can not be right to run the ADS environment, so upload the sub-module for reference!
Platform: |
Size: 117760 |
Author: 郑鼎立 |
Hits:
Description: 用ADS1.2开发的一个S3C44B0的测试程序。
硬件平台是公板的44B0开发板。搭载SST39VF160型号的NORFLASH。主要用做开发板上板载功能的测试，包括UART,LED,KEY,-A S3C44B0 ADS1.2 development test program. The hardware platform is a public board 44B0 development board. Equipped with the SST39VF160 models NORFLASH. Primarily used for the development of on-board testing of onboard functions, including UART, LED, KEY, and so on
Platform: |
Size: 287744 |
Author: jplzl |
Hits: