Description: 是一种关于无线传感器网络的质心定位程序的MATLAB原代码.希望对大家有帮助-Is a wireless sensor network on the centroid position of the MATLAB program source code. I hope all of you help ... Platform: |
Size: 1024 |
Author:李亚杰 |
Hits:
Description: Energy consumption and route changes are the most important features in the design of mobile sensor routing protocols. This study references geographic position information assisted routing of an ad hoc network to design an energy efficient routing protocol. Platform: |
Size: 283648 |
Author:vino |
Hits:
Description: The sensor nodes of a wireless grain depot
surveillance system are deployed in crystal grids, which provide
lot of valid position information. To avoid the energy
consumption unbalance of the single hop routing model adopted
by LEACH protocol, a novel hybrid routing model is proposed
in this paper. Multi-hop routing is introduced into the distant
field nodes through right angle transferring of approximate
equivalence consumption path. And the average energy
consumption is used as a threshold of selecting intermediate
transferring nodes to minimize total variance of node s energy
consumption, so that balance the whole network. Simulations
show that the hybrid model eliminates hot spots within cluster
and prolong the lifetime ofWSN. -The sensor nodes of a wireless grain depot
surveillance system are deployed in crystal grids, which provide
lot of valid position information. To avoid the energy
consumption unbalance of the single hop routing model adopted
by LEACH protocol, a novel hybrid routing model is proposed
in this paper. Multi-hop routing is introduced into the distant
field nodes through right angle transferring of approximate
equivalence consumption path. And the average energy
consumption is used as a threshold of selecting intermediate
transferring nodes to minimize total variance of node s energy
consumption, so that balance the whole network. Simulations
show that the hybrid model eliminates hot spots within cluster
and prolong the lifetime ofWSN. Platform: |
Size: 887808 |
Author:mihir |
Hits:
Description: 提出了基于无线传感器网络的浮标网络水下GPS定位系统模型,分析了
该模型的结构、功能以及工作过程,并从几何角度探讨了水下目标的声学定位算
法。结合Range-Free算法与分布式算法的思想,设计了一种传感器节点自定位算
法,称为BSR(Beacons Signal Ring)定位算法,并对该算法的性能进行了评估与
比较。该算法在锚节点处的信标信号中引入能量等级的机制,无需相邻传感器节
点间信息交换,有效降低了算法复杂度与通信开销。性能分析结果显示,该算法
性能良好,在应用环境下相比于APIT算法与质心算法具有更低的位置估计误差。
论文还研究了基于双元检测传感器的协作式的目标跟踪策略,对相应的跟踪过程
进行了描述。提出了使用加权质心算法的目标位置估计模型,以及线性预测机制,
使跟踪过程具有较小的计算和通信代价。-In this thesis,we presents a buoy network of underwater GPS positioning system
model based on the wireless sensor network.The structure,function and process in the
model were analyzed.Underwater target acoustic localization algorithm were explored
through geometry way.Combined with the idea of Range-Free algorithm and distributed
algorithm,a sensor nodes self-localization algorithm were designed,which called BSR
(Beacons Signal Ring)localization algorithm,the algorithm performance evaluation and
comparison has also been presented.The algorithm use a small number of anchor nodes.
Each anchor emits beacons at different power levels.This mechanism does not required
information exchange between neighboring sensors,and reduced the complexity of the
algorithm and communication overhead effectively.The results of performance analysis
showed that BSR provides a lower position estimation error than APIT and Centroid
under a wide range of conditions.The thesis introduced process of ta Platform: |
Size: 1416192 |
Author:lq |
Hits:
Description: 基于IP传感器的监控软件能够对分布在网络上的作为独立节点的传感器进行数据采集、校准等操作,而在监控软件开发中,首先就要解决网络通信问题。本文以搭载了Linux操作系统的IP传感器(ARM核)作为下位机,在其上编程实现Socket通信的服务器端,提供Socket客户端的并发访问。以装有Windows的计算机作为上位机,在其 上编程实现Socket通信的客户端,实现对Socket服务器端的访问,解决了IP传感器网络监控平台的通信问题。 -The monitoring software based on the IP sensor can carry on some operations to the sensor distributed in the
network as independent nodes,such as data acquisition,calibration,and SO 013.But the network communication
problem must be solved firstly in the development of the monitoring software.This paper takes the IP sensor(ARM
nucleus)embedded Linux operating system as the lower position machine,which realized the socket server by
programming in the communication,provided the subsequent visitation of the clients.The computer loaded Windows
operating system is taken as the superior machine,which realized the Socket client that can visit the Socket server by
programming in the communication.The communication problem of the network momtoring platforrn has been
resolved Platform: |
Size: 279552 |
Author:程文翔 |
Hits:
Description: Monitoring applications define an important
class of applications used in wireless sensor networks.
In these applications the network perceives
the environment and searches for event
occurrences (phenomena) by sensing different
physical properties, such as temperature, humidity,
pressure, ambient light, movement, and presence
(for target tracking). In such cases the
location information of both phenomena and
nodes is usually required for tracking and correlation
purposes. In this work we summarize most
of the concepts related to localization systems for
WSNs as well as how to localize the nodes in
these networks (which allows the localization of
phenomena). By dividing the localization systems
into three distinct components — distance/angle
estimation, position computation, and localization
algorithm — besides providing a didactic
viewpoint, we show that these components can
be seen as subareas of the localization problem
that need to be analyzed and studied separately. Platform: |
Size: 134144 |
Author:ginanjar |
Hits:
Description: 一种新的基于链路质量指标或接收信号强度获取
节点相对位置的实用型高适应性定位算法,降低了无线传感网络节点定位对硬件的要求-A new index based on link quality or received signal strength for the relative position of nodes practical high adaptability positioning algorithm, reducing the wireless sensor network node positioning the hardware requirements Platform: |
Size: 421888 |
Author:朱晓婷 |
Hits:
Description: WSN的GAF算法程序针对无线传感器网络节点部署密集的特点,提出了 GAF 算法。在 GAF
算法中,根据节点的地理位置信息和节点的无线电发射半径(radio range),传
感器网络部署区域被划分为虚拟单元格(virtual gird)。根据自己的物理位置信
息,各个节点被划入到自己的单元格中。各个节点的物理位置信息可以由 GPS 或
其它定位系统得到。
-GAF algorithm of WSN deployment intensive features for wireless sensor network node, proposed GAF algorithm. In GAF algorithm, the radius of the radio transmitting node and the node' s location information (radio range), the sensor network deployment area is divided into a virtual cell (virtual gird). According to their physical location information, each node is classified into its own cell. The physical position information of each node can be obtained by the GPS or other positioning systems. Platform: |
Size: 7168 |
Author:zhangxiansheng |
Hits:
Description: LEACH [1] is an autonomous adaptive clustering protocol that distributes the
energy load evenly among the sensors in the network using randomization. The
nodes organize themselves into local clusters, with one node acting as the local
base station or cluster head. In order to not drain the battery of a single sensor
randomized rotation of the high-energy cluster head position such that it rotates
among the various sensors. Once the cluster head has all the data from the nodes in
its cluster, the cluster head node aggregates the data and then transmits the
compressed data to the base station. Since it compress the amount of data being
sent from the clusters to the base station, energy dissipation is reduced and system
lifetime is thus enhanced.
A Comparative Analysis of Energy-Efficient Routing Protocols 401
This Platform: |
Size: 2048 |
Author:jagadish |
Hits:
Description: 基于TCP协议的Labview网络摄像头视频接收及显示、温湿度监测及控制指令远程发送上位机.vi,机器人下位机装载温湿度传检测、人体感应、红外、烟雾监测等传感器以及网络摄像头,下位机实时采集的图像视频、传感器数据等经过WiFi无线传输,上位机通过TCP协议实时接收下位机传输的数据,显示温湿度、人、烟雾等状态信息,还可以通过Labview上位机向机器人下位机远程发送转弯、前进、上楼梯等运动控制指令,并进行了简单的控件、界面美化-ON划词翻译ON实时翻译
Labview network video camera TCP protocol to receive and display, temperature and humidity monitoring and control of remote host computer sends instruction based on.Vi, robot crew loading temperature and humidity detection, the human body induction, infrared, smoke monitoring sensor and network camera, video image, the lower position machine real-time acquisition of sensor data through WiFi wireless transmission, host computer through the TCP protocol to receive real-time lower computer transmission of data, display of temperature and humidity, people, smoke and other state information, but also through the Labview host computer to the robot slave machine remote transmitting turning, forward, up the stairs and other motion control instruction, and has carried on the simple controls, to beautify the interface Platform: |
Size: 1957888 |
Author:walle |
Hits:
Description: 基于传感网人员定位研究程序源代码,需要改进,希望采用-Position of staff based sensor network source code, we need to improve, looking to adopt Platform: |
Size: 14336 |
Author:李国乐 |
Hits:
Description: msp430G2553单片机为主控芯片,DS18B20为温度传感器,SHT10位湿度传感器,Si4463为传感器网络无线模块,将测得的温度湿度信息通过si4463无线模块发送到主机。-msp430G2553 microcontroller as the main chip, DS18B20 temperature sensor, SHT10 position humidity sensors, Si4463 wireless sensor network module, the measured temperature and humidity information si4463 radio module is sent to the host. Platform: |
Size: 150528 |
Author:自珍 |
Hits:
Description: Awareness of the physical location for each node
is required by many wireless sensor network applications. The
discovery of the position can be realized utilizing range measurements
including received signal strength, time of arrival, time
difference of arrival and angle of arrival
Platform: |
Size: 2600960 |
Author:hadjidw |
Hits:
Description: 程序主要功能是用C#完成一个温度传感网络监控系统,实现对各个温度传感器终端(这里我是用的单片机控制两个DS18B20检测温度SIM900 进行GPRS通信+M87获取GPS还有时间信息,比较简单可以自己开个板做)数据监控并写入数据库。
还有个客户管理系统对不同终端信息,比如用户电话,地址之类管理,也可以看各个传感器历史数据,并用VISIFIRE监视温度曲线,还有用谷歌地图查看传感器位置之类,实时查看传感器状态,传感器报修,异常传感器查询,维修记录打印.........
员工管理系统则是管理员工密码权限之类。-The main function of the program is to use C# to complete a temperature sensor network monitoring system, for each temperature sensor terminal (here I use the microcontroller to control two DS18B20 detects temperature SIM900 GPRS communication+M87 were also obtain GPS time information can own is relatively simple open a panel to do so), data monitoring and written to the . There is a customer management systems for different terminal information such as the user' s phone, address, like management, you can also see each sensor historical data, and use VISIFIRE monitor the temperature profile, as well as view the position of the sensor and the like with Google Maps, view real-time sensor status, sensor repair, abnormal sensor interrogation, maintenance records Print ......... staff management system is used to manage employee passwords and the like privileges. Platform: |
Size: 2095104 |
Author:maxzeno |
Hits:
Description: 能量采集型无线传感网中的一种基于地理位置延时敏感的路由方法-Routing method based on geographical position delay sensitive in energy collecting type wireless sensor network Platform: |
Size: 5120 |
Author:胡江川 |
Hits:
Description: NETWORKING LAB PROGRAMS
In this paper, we use a wireless sensor network with 100 unknown nodes, which are randomly produced
and uniformly distributed in a square region of 5R*5R. Assuming that all nodes are located in the first
quadrant, the location of nodes is represented by a two-dimensional coordinates, simultaneously stands for
the absolute position, and all nodes are in a quiescent state after deployment. In the algorithm PGA, it
supposes population size equals 50 and crossover probability pc=0.8, mutation probability pm=0.01, the
number of iterations Iter=100 The RCDE algorithm parameters are set as the same to PGA outside of
scaling factor F=0.8. In order to facilitate comparison, the parameters of GAL algorithm are completely
equated to that of PGA algorithm.-NETWORKING LAB PROGRAMS
In this paper, we use a wireless sensor network with 100 unknown nodes, which are randomly produced
and uniformly distributed in a square region of 5R*5R. Assuming that all nodes are located in the first
quadrant, the location of nodes is represented by a two-dimensional coordinates, simultaneously stands for
the absolute position, and all nodes are in a quiescent state after deployment. In the algorithm PGA, it
supposes population size equals 50 and crossover probability pc=0.8, mutation probability pm=0.01, the
number of iterations Iter=100 The RCDE algorithm parameters are set as the same to PGA outside of
scaling factor F=0.8. In order to facilitate comparison, the parameters of GAL algorithm are completely
equated to that of PGA algorithm. Platform: |
Size: 58368 |
Author:ria |
Hits:
Description: SeetaFace人脸识别引擎包括了搭建一套全自动人脸识别系统所需的三个核心模块,即:人脸检测模块SeetaFace Detection、面部特征点定位模块SeetaFace Alignment以及人脸特征提取与比对模块SeetaFace Identification。
主要功能:
人脸检测模块(SeetaFace Detection): 采用了一种结合传统人造特征与多层感知机(MLP)的级联结构,在FDDB上达到了84.4 的召回率(100个误检时),并可在单个i7 CPU上实时处理VGA分辨率的图像。
面部特征点定位模块(SeetaFace Alignment): 通过级联多个深度模型(栈式自编码网络)来回归5个关键特征点(两眼中心、鼻尖和两个嘴角)的位置,在AFLW数据库上达到state-of-the-art的精度,定位速度在单个i7 CPU上超过200fps。
人脸识别模块(SeetaFace Identification): 采用一个9层的卷积神经网络(CNN)来提取人脸特征,在LFW数据库上达到97.1 的精度(注:采用SeetaFace人脸检测和SeetaFace面部特征点定位作为前端进行全自动识别的情况下),特征提取速度为每图120ms(在单个i7 CPU上)。
-The SeetaFace Face Recognition Engine includes the three core modules required to build a fully automated face recognition system, namely the Face Detection Module SeetaFace Detection, the Face Feature Point Segment Module SeetaFace Alignment, and the Face Feature Extraction and Matching Module SeetaFace Identification.
The main function:
Face Detection Module (SeetaFace Detection): A combination of traditional artificial features and multi-layer sensor (MLP) cascade structure, in the FDDB reached 84.4 recall rate (100 false detection), and Can process VGA resolution images in real time on a single i7 CPU.
Face feature positioning module (SeetaFace Alignment): by cascading multiple depth model (stack self-coding network) to return to five key feature points (two centers, nose and two mouth) position, in the AFLW To achieve the state-of-the-art accuracy, positioning speed in a single i7 CPU more than 200fps.
Face Recognition Module (SeetaFace Identificat Platform: |
Size: 2048 |
Author:赵炳坤 |
Hits:
Description: LCD显示温度+串口接收温度xxxx不要管后面本文介绍了简易集散温度控制系统,系统为两层结构,上位机用组态王软件完成对下位机的监控。下位机利用数字温度传感器DS18B20 ,结合单片机组成传感器网络,设计了相关的硬件和软件,实现多点温度检测与控制。(LCD display temperature + serial port receiving XXXX leave behind a simple distributed temperature control system has been introduced in this paper, the system for two layer structure, completion of PC with kingview software on a machine monitor. The position machine USES digital temperature sensor DS18B20, combined with the single sensor network, designed the related hardware and software, to realize multi-point temperature detection and control.) Platform: |
Size: 1364992 |
Author:411001793@qq.com |
Hits: