Location:
Search - ledkey
Search list
Description: 拷拷贝到你的Keil安装目录下的c51\\bin文件夹中。
工程文件中需设置一下:
project->Option for Target Target1
选Debug页
左侧最下面
Dialog Dll
一般是DP51.DLL，不用修改
Parameter
中是
-P51
在其后加入
-dledkey
即该行看起来应该是这样的：
-p51 -dledkey
保存即可
进入调试后，点击：Peripherals，其中多出一个“键盘LED实验仿真板”选择该项即可。-emboss your copy of the Keil installation directory under the decoder \\ bin folder. The project document to be provided as follows : project-gt; Option for Target Target1 election Debug bottom of the left page is generally Dialog Dll DP51.DLL, need not be amended Parameter is - P51 add after-dledkey that the bank should look like this :-p51-can be preserved into dledkey to debug and click : Peripherals, in which more than a "keyboard LED simulation board," which can be chosen.
Platform: |
Size: 56479 |
Author: 刘刚 |
Hits:
Description: 给大家传两个Keil的插件,平凡工作室做的,很棒,可以在Keil中模拟出实验板,能作不少实验(ledkey,simboard)
使用说明：
1. 请将下载的2个插件内容拷贝到uVision 的安装目录下的 \\Keil\\C51\\BIN 中
2. 修改 Tool.ini, 此文件位于 uVision 的安装目录 \\keil 下.
请将下面的内容 添加到 [C51] 部分的后面.
AGSI1=ledkey.dll (\"ledkey\")
AGSI2=simboard.dll (\"simboard\")
3. 重启uVsion. 进入Debug 模式, 打开菜单Peripheral, 发现增加了2项
分别是键盘LED仿真板，51实验仿真板。
这样使用时就不用每次设置了，任何时候打开都可以用。-for everyone - 2 Keil plug-in, the average studios do and outstanding, Keil which can simulate experimental plates, which can be made many experiments (ledkey. simboard) use : 1. Please download the plug-in two kernels to copy the contents of the installation directory \\ Keil \\ C51 \\ BIN 2. Tool.ini changes, this document kernels at the installation directory \\ under Keil. Please add the following line to the Department of [C51] the points behind. AGSI1 = ledkey.dll ( "ledkey") = sim AGSI2 board.dll ( "simboard") 3. uVsion resume. enter Debug mode - open menu Peripheral and found an increase of 2 respectively LED keyboard simulation board, 51 simulation board. Such use would not have to set up every time, any time you can use open.
Platform: |
Size: 129764 |
Author: 李伟 |
Hits:
Description: 请将下载的2个插件内容拷贝到uVision 的安装目录下的 \\Keil\\C51\\BIN 中
2. 修改 Tool.ini, 此文件位于 uVision 的安装目录 \\keil 下.
请将下面的内容 添加到 [C51] 部分的后面.
AGSI1=ledkey.dll (\"ledkey\")
AGSI2=simboard.dll (\"simboard\")
3. 重启uVsion. 进入Debug 模式, 打开菜单Peripheral, 发现增加了2项
分别是键盘LED仿真板，51实验仿真板。
Platform: |
Size: 50376 |
Author: wuhenaimin |
Hits:
Description: 请将下载的2个插件内容拷贝到uVision 的安装目录下的 \\Keil\\C51\\BIN 中
2. 修改 Tool.ini, 此文件位于 uVision 的安装目录 \\keil 下.
请将下面的内容 添加到 [C51] 部分的后面.
AGSI1=ledkey.dll (\"ledkey\")
AGSI2=simboard.dll (\"simboard\")
3. 重启uVsion. 进入Debug 模式, 打开菜单Peripheral, 发现增加了2项
分别是键盘LED仿真板，51实验仿真板。
Platform: |
Size: 56853 |
Author: qiyue |
Hits:
Description: 拷拷贝到你的Keil安装目录下的c51\bin文件夹中。
工程文件中需设置一下:
project->Option for Target Target1
选Debug页
左侧最下面
Dialog Dll
一般是DP51.DLL，不用修改
Parameter
中是
-P51
在其后加入
-dledkey
即该行看起来应该是这样的：
-p51 -dledkey
保存即可
进入调试后，点击：Peripherals，其中多出一个“键盘LED实验仿真板”选择该项即可。-emboss your copy of the Keil installation directory under the decoder \ bin folder. The project document to be provided as follows : project-gt; Option for Target Target1 election Debug bottom of the left page is generally Dialog Dll DP51.DLL, need not be amended Parameter is- P51 add after-dledkey that the bank should look like this :-p51-can be preserved into dledkey to debug and click : Peripherals, in which more than a "keyboard LED simulation board," which can be chosen.
Platform: |
Size: 56320 |
Author: |
Hits:
Description: 给大家传两个Keil的插件,平凡工作室做的,很棒,可以在Keil中模拟出实验板,能作不少实验(ledkey,simboard)
使用说明：
1. 请将下载的2个插件内容拷贝到uVision 的安装目录下的 \Keil\C51\BIN 中
2. 修改 Tool.ini, 此文件位于 uVision 的安装目录 \keil 下.
请将下面的内容 添加到 [C51] 部分的后面.
AGSI1=ledkey.dll ("ledkey")
AGSI2=simboard.dll ("simboard")
3. 重启uVsion. 进入Debug 模式, 打开菜单Peripheral, 发现增加了2项
分别是键盘LED仿真板，51实验仿真板。
这样使用时就不用每次设置了，任何时候打开都可以用。-for everyone- 2 Keil plug-in, the average studios do and outstanding, Keil which can simulate experimental plates, which can be made many experiments (ledkey. simboard) use : 1. Please download the plug-in two kernels to copy the contents of the installation directory \ Keil \ C51 \ BIN 2. Tool.ini changes, this document kernels at the installation directory \ under Keil. Please add the following line to the Department of [C51] the points behind. AGSI1 = ledkey.dll ( "ledkey") = sim AGSI2 board.dll ( "simboard") 3. uVsion resume. enter Debug mode- open menu Peripheral and found an increase of 2 respectively LED keyboard simulation board, 51 simulation board. Such use would not have to set up every time, any time you can use open.
Platform: |
Size: 129024 |
Author: 李伟 |
Hits:
Description: Keil C51单片机开发环境的仿真工具，能够仿真各端口的输入输出。-Keil C51 microcontroller development environment simulation tool, the simulation of the input and output ports.
Platform: |
Size: 148480 |
Author: 王永 |
Hits:
Description: 请将下载的2个插件内容拷贝到uVision 的安装目录下的 \Keil\C51\BIN 中
2. 修改 Tool.ini, 此文件位于 uVision 的安装目录 \keil 下.
请将下面的内容 添加到 [C51] 部分的后面.
AGSI1=ledkey.dll ("ledkey")
AGSI2=simboard.dll ("simboard")
3. 重启uVsion. 进入Debug 模式, 打开菜单Peripheral, 发现增加了2项
分别是键盘LED仿真板，51实验仿真板。-Please download the contents of two plug-ins are copied to the installation directory uVision under KeilC51BIN 2. Modify Tool.ini, this file is located in the installation directory uVision under keil. Please Add the following line to [C51] part of the back. AGSI1 = ledkey.dll (ledkey) AGSI2 = simboard.dll (simboard) 3. Reset uVsion. entered the Debug mode, open the menu Peripheral, found an increase of 2 are keyboard LED emulation board, emulation board 51 experiments.
Platform: |
Size: 50176 |
Author: wuhenaimin |
Hits:
Description: 请将下载的2个插件内容拷贝到uVision 的安装目录下的 \Keil\C51\BIN 中
2. 修改 Tool.ini, 此文件位于 uVision 的安装目录 \keil 下.
请将下面的内容 添加到 [C51] 部分的后面.
AGSI1=ledkey.dll ("ledkey")
AGSI2=simboard.dll ("simboard")
3. 重启uVsion. 进入Debug 模式, 打开菜单Peripheral, 发现增加了2项
分别是键盘LED仿真板，51实验仿真板。-Please download the contents of two plug-ins are copied to the installation directory uVision under KeilC51BIN 2. Modify Tool.ini, this file is located in the installation directory uVision under keil. Please Add the following line to [C51] part of the back. AGSI1 = ledkey.dll (ledkey) AGSI2 = simboard.dll (simboard) 3. Reset uVsion. entered the Debug mode, open the menu Peripheral, found an increase of 2 are keyboard LED emulation board, emulation board 51 experiments.
Platform: |
Size: 56320 |
Author: qiyue |
Hits:
Description: 两个常用的单片机仿真实验板，里面有详细的教程和例子，大家一看便懂！-Two commonly used single-chip simulation board, which has a detailed tutorial and examples, everyone will know one to see!
Platform: |
Size: 166912 |
Author: P50614083 |
Hits:
Description: 这是一个单片机小程序 希望对单片机爱好者刚入门的同学一个帮组-This is a small program Singlechip Singlechip lovers just want to start a help group of students
Platform: |
Size: 50176 |
Author: 李欣 |
Hits:
Description: keilc51仿真板软件使用方法：1. 请将下载的2个插件内容拷贝到uVision 的安装目录下的 \Keil\C51\BIN 中
2. 修改 Tool.ini, 此文件位于 uVision 的安装目录 \keil 下.
请将下面的内容 添加到 [C51] 部分的后面.
AGSI1=ledkey.dll ("ledkey")
AGSI2=simboard.dll ("simboard")
3. 重启uVsion. 进入Debug 模式, 打开菜单Peripheral, 发现增加了2项
分别是键盘LED仿真板，51实验仿真板。
这样使用时就不用每次设置了，任何时候打开都可以用
-keilc51 board simulation software to use: 1. Please download the contents of two plug-ins are copied to the installation directory uVision under KeilC51BIN 2. modify Tool.ini, this file is located in the installation directory uVision under keil. I would be grateful if the contents of the following added to the [C51] part of the back. AGSI1 = ledkey.dll ( ledkey ) AGSI2 = simboard.dll ( simboard ) 3. Reset uVsion. entered the Debug mode, open the menu Peripheral, found an increase of 2 are keyboard LED emulation board, emulation board 51 experiments. So no need to use each set at any time can be opened
Platform: |
Size: 107520 |
Author: zjb |
Hits:
Description: 该程序实现的是可控流水灯
/* 接P3.2 的键为开始键，按此键则灯开始流动（由下而上）
/* 接P3.3 的键为停止键，按此键则停止流动，所有灯暗
/* 接P3.4 的键为向上键，按此键则灯由上向下流动
/* 接P3.5 的键为向下键，按此键则灯由下向上流动-The program is controlled water realize lights/* P3.2 access keys for the Start button, click the start button then lights flow [bottom-up]/* P3.3 access keys for the stop button, this button is to stop the flow, all the lights the dark/* P3.4 access to up-arrow key, this key is the downward flow of light from/* Access P3.5 for the down arrow key, this button will light from the next upward mobility
Platform: |
Size: 32768 |
Author: sdsajsdsaj |
Hits:
Description: 基于tms320c5509下的key和lcd编程-Based on the key and tms320c5509 programming lcd
Platform: |
Size: 320512 |
Author: zhulifei |
Hits:
Description: LED键盘模组自检程序，cfg，原理图及PCB版图，说明书及原理图-LED Key
Platform: |
Size: 534528 |
Author: 陈洁 |
Hits:
Description: dsp2407的led，key的程序，已经调试成功！！很有用-failed to translate
Platform: |
Size: 27648 |
Author: hua |
Hits:
Description: 平凡老师的ledkey给大家传两个Keil的插件,平凡工作室做的,很棒,可以在Keil中模拟出实验板,能作不少实验。-Ledkey ordinary teacher to everyone Keil Chuan two plug-ins, the average studio to do good, you can simulate the experiment in the Keil board, can make a lot of experiments.
Platform: |
Size: 136192 |
Author: haibucuo |
Hits:
Description: 一本書上的範例,使用DSP2407A的数字输入输出模块-Of a book on the example of the use of the digital input and output modules DSP2407A
Platform: |
Size: 1024 |
Author: q123w789 |
Hits:
Description: DSPF2812学习程序： 按键记数程序，对S1的按键次数记数，以二进制显示在16个LED上，适于初学者学习-DSPF2812 learning process: key count procedures, count the number of S1 keys to a binary LED displays on the 16, suitable for beginners to learn
Platform: |
Size: 384000 |
Author: panda |
Hits:
Description: C51学习非常有用的资料，包含simboard.dll ledkey.dll两个附件.-usefull material for LEARING MCS51,INCLUDING simboard.dll ledkey.dll
Platform: |
Size: 243712 |
Author: nihao |
Hits: