Location:
Search - flash bios
Search list
Description: S3C44BOX的BIOS。可使用的命令：help --- show help ? --- = help date --- show or set current date time --- show or set current time setweek --- set weekday clock --- show system running clock setmclk --- set system running clock setbaud ------ set baud rate ipcfg ------ show or set IP address load ------ load file to ram comload ------ load file from serial port run ------ run from sdram prog ------ program flash copy ------ copy flash from src to dst address boot ------ boot from flash backup ------ move bios to the top of flash md ------ show memory data move ------ move program from flash to sdram-S3C44BOX BIOS. Use the command : help show help ------ ------ ------ = help show date set current date or time or set ------ show current time setweek ---- -- set weekday show ------ clock system running clock setmclk ------ set system running clock setbaud set baud rate ------ ------ ipcfg show or set IP address load - ----- load file to ram comload ------ load file from serial port run ------ run from SDRAM prog ------ ------ program flash copy copy from flash src dst address boot to boot from flash ------ ------ backup bios move to the top of flash memory md show ------ ------ move data move from program to flash SDRAM
Platform: |
Size: 626548 |
Author: 付杰 |
Hits:
Description: 这是bios-lt的最新板，(1) bios.img占用的扇区数由4个合并为2个,相应的文件大小由193K减小为66K
(2) 实现了对FLASH芯片BOOT扇区的处理,建立FLASH分区时不用再考虑让开BOOT扇区
改动的主要目的是想做到:
在29F040上空出384K的空间,建立一个分区存放不含应用程序的uClinux kernel,
将29LV160作为一个大分区,在其上建立JFFS2文件系统,并挂接为uClinux的根文件系统.
系统应用程序全部存储在JFFS2文件系统中. 再使用tmpfs来做临时目录和 /var目录.
这样就可以做到建立一个更加通用的,拿来就可以运行的uClinux系统,相当于给开发版
预装一个操作系统^_^ 由于JFFS2是文件系统是可写的,开发者只需将编好的用户程序
通过FTP下载到uClinux中,再改一改启动脚本即可 省去了配置uClinux环境的重复劳动
Platform: |
Size: 94992 |
Author: zxbttt |
Hits:
Description: FLASH BIOS擦写工具，对从事PCI BIOS设计方面的工作有帮助！
Platform: |
Size: 2374 |
Author: fansj |
Hits:
Description: 主要内容包含： AMI (American Megatrends Inc.)之BIOS源代码(Source Code)，版本为6.27.10 (简称627.10)。由于本Open Source BIOS源代码是针对采用SiS530整合芯片组为结构的主机板而设计，所以当您准备钻研此源代码，或编译自己的BIOS监控程序之前，需要自已准备一些工具才行。 在硬件部份，请准备一片SiS530 (不限品牌)的主机板，与足够的Flash 工具 (如烧写BIOS要用的FlashROM、拔IC专用的IC夹等等)，以作为研究的材料。 在软件部份，还需要准备Microsoft Assembler 6.11。 虽然CODE有点小缺漏，但其中好东西多多！-main contents include : AMI (American Megatrends Inc.) Zhi BIOS source code (Source Code), version 6.27.10 (627.10). As the Open Source BIOS source code is used against SiS530 integrated chip structure of the group and the motherboard design, and so, when are you going to study this source code, or compile their own BIOS control procedures required before preparing their own tools it. The hardware part, please prepare a SiS530 (Open-brand) motherboard, with enough Flash tools (such as the use of burning BIOS Flash, pulling IC dedicated IC folders, etc.), as research material. The software portion, but also need to be prepared to Microsoft Assembler 6.11. Although CODE a little gaps, but many good things!
Platform: |
Size: 15360 |
Author: |
Hits:
Description: S3C44BOX的BIOS。可使用的命令：help --- show help ? --- = help date --- show or set current date time --- show or set current time setweek --- set weekday clock --- show system running clock setmclk --- set system running clock setbaud ------ set baud rate ipcfg ------ show or set IP address load ------ load file to ram comload ------ load file from serial port run ------ run from sdram prog ------ program flash copy ------ copy flash from src to dst address boot ------ boot from flash backup ------ move bios to the top of flash md ------ show memory data move ------ move program from flash to sdram-S3C44BOX BIOS. Use the command : help show help------------------ = help show date set current date or time or set------ show current time setweek------ set weekday show------ clock system running clock setmclk------ set system running clock setbaud set baud rate------------ ipcfg show or set IP address load------ load file to ram comload------ load file from serial port run------ run from SDRAM prog------------ program flash copy copy from flash src dst address boot to boot from flash------------ backup bios move to the top of flash memory md show------------ move data move from program to flash SDRAM
Platform: |
Size: 626688 |
Author: 付杰 |
Hits:
Description: 这是S3C44B0的BIOS或BOOT LOADER 程序中详细介绍了启动代码和FLASH 的读写 这很容易移植到其它ARM芯片-S3C44B0 This the BIOS or BOOT LOADER detailed procedures for the boot code reader and FLASH This can be easily ported to other ARM chips
Platform: |
Size: 481280 |
Author: 黄伟 |
Hits:
Description: UArmJtag2.0仿真软件 功能强大、超“硬”的软件仿真器！ 博创科技最新发布的ARM调试驱动程序UArmJtag2.0是UArmJtag1.5的升级版本，是继能够成功支持ADS1.2的UArmJtag1.5后的又一重大贡献，UArmJtag2.0可以独立实现FLASH烧写功能，完全替代一般意义上的硬件仿真器，使广大高校师生和科研爱好者从高成本的ARM开发工具中解脱出来！ UArmJtag是博创科技自主研发的，超低成本，高性能的ARM仿真调试工具，支持目前市场普遍采用的并口模拟简易仿真器，使简易仿真器速度和功能达到并超过一般通用ARM硬件仿真器的水平。UArmJtag完全支持RDI 1.5.1调试协议，可以和ARM公司的SDT2.51、ADS1.2仿真开发环境配合使用。 最新的UArmJtag2.0版本保持了UArmJtag 1.5的原有功能，并增加了以下独到功能： 1、FLASH编程功能：把硬件仿真器的算法加入到了UArmJtag2.0版中，实现了对FLASH的稳定编程，编程速度达到甚至超过部分硬件仿真器的水平。使用户彻底解决了丢失BIOS数据的困扰。 2、支持ARM9在线调试：UArmJtag2.0版支持ARM7/ARM9系列嵌入式微处理器的调试，在ADS1.2开发环境下仿真调试速度达到甚至超过部分硬件仿真器的水平，稳定可靠。-UArmJtag2.0 simulation software powerful, ultra "hard" software simulator! Bo CIT latest ARM debugging driver UArmJtag2.0 UArmJtag1.5 is an upgraded version, following the success of UArmJtag1.5 ADS1.2 support of another major contribution, UArmJtag2.0 FLASH can be achieved independent of burning function completely replace the general sense of the hardware Simulator, the majority of college students and research enthusiasts from the high cost of the ARM development tools to extricate themselves! UArmJtag Bo Chong is a self-developed technology, ultra-low-cost, high-performance ARM simulation debugging tools, support for the widely used parallel simulation simple simulation, which allows for simple simulation speed and functionality meet and exceed GM ARM hardware simulator level
Platform: |
Size: 3332096 |
Author: 杨天 |
Hits:
Description: FS2410板子的bootloader,在ADS中编译出bin文件，烧写到2410 flash 0地址重新上电即可。-Bootloader FS2410 plank of the ADS compile the bin, burning of the flash 0 2,410 addresses can be re-power.
Platform: |
Size: 607232 |
Author: 张海涛 |
Hits:
Description: 1）通过fs44b0xbios和网口，将upload里的boot.bin烧写到flash 0 地址
见“FS44B0Xbios使用指南”之5
2) 打开57600超级终端
3) 连上串口线和jtag调试头
4）打开FS44B0X开发板电源
5）运行jtag.exe,在SDT下调入 ucosii_demo.axf，运行
6) 在超级终端上有三个任务的运行与退出显示，板子上的三个发光二极管会来回闪烁。
-a) fs44b0xbios and LAN, li will upload the burning of flash boot.bin 0 addresses see "FS44B0Xbio s User's Guide "5 2) to open 57,600 Super Terminal 3) connected to serial lines and the first four JTAG Debugging) Open FS44B0X development board Power 5) Run jtag.exe, under the redeployment ucosii_demo.axf SDT, running 6) of the Super Terminal 3 on the mandate of the operation and withdraw from the show, on board the three light-emitting diodes will flicker back and forth.
Platform: |
Size: 215040 |
Author: 张淼林 |
Hits:
Description: 经典s3c44b0xBios引导程序代码内含详细说明
烧写步骤
1> 开发板上电
2> 执行Debug目录下的F.bat文件将bios程序烧写到flash中
3> 将PC配置为192.168.111网段
4> 用交叉网线连接开发板和PC
5> 运行串口监视软件,波特率115200
6> 开发板复位
-classic s3c44b0xBios guide code contains detailed steps 1gt burning; Development board-- inversion; Debug implementation of the directory F.bat document will bios flash of burning procedures which 3gt; PC configuration of the network 4gt 192.168.111; Using cross-network link development board and PC 5GT; Serial run monitoring software, 6gt 115,200 baud rate; development board reduction
Platform: |
Size: 1143808 |
Author: 李大嘴 |
Hits:
Description:
Platform: |
Size: 5893120 |
Author: 冯荣俊 |
Hits:
Description: 这是bios-lt的最新板，(1) bios.img占用的扇区数由4个合并为2个,相应的文件大小由193K减小为66K
(2) 实现了对FLASH芯片BOOT扇区的处理,建立FLASH分区时不用再考虑让开BOOT扇区
改动的主要目的是想做到:
在29F040上空出384K的空间,建立一个分区存放不含应用程序的uClinux kernel,
将29LV160作为一个大分区,在其上建立JFFS2文件系统,并挂接为uClinux的根文件系统.
系统应用程序全部存储在JFFS2文件系统中. 再使用tmpfs来做临时目录和 /var目录.
这样就可以做到建立一个更加通用的,拿来就可以运行的uClinux系统,相当于给开发版
预装一个操作系统^_^ 由于JFFS2是文件系统是可写的,开发者只需将编好的用户程序
通过FTP下载到uClinux中,再改一改启动脚本即可 省去了配置uClinux环境的重复劳动
-err
Platform: |
Size: 95232 |
Author: zxbttt |
Hits:
Description: 主板BIOS升级工具,适合较古老的机器使用
8.48版-mainboard BIOS upgrade tools for ancient machines used version 8.48
Platform: |
Size: 215040 |
Author: firewise |
Hits:
Description: 这是2410的驱动代码,有flash和lcd驱动-This is the driving code 2410, a flash and lcd driver
Platform: |
Size: 607232 |
Author: 汪志国 |
Hits:
Description: TIDSP的软件CCS里最难的就是DSP BIOS。这是个强大又难以理解的部分。这是其一个例子。-TIDSP CCS software is the hardest DSP BIOS. It is also difficult to understand the strong part. This is an example.
Platform: |
Size: 91136 |
Author: bob |
Hits:
Description: 关于ATMEL ARM9200的BIOS包括启动，三星的NAND FLASH编程，NOR FLASH编程，两者交替编程-on ATMEL ARM9200 BIOS including the initiation, Samsung's NAND Flash programming, NOR FLASH programming, the two alternate programming
Platform: |
Size: 139264 |
Author: |
Hits:
Description: arm7开发板fs44b0x原代码
说明：
1) 本项目在ADS1.2下编译,在SDT2.51的ADW中调试。编译时，请将整个fs44b0xbios目录拷贝到c:\下
2) 现在只对39VF160烧入,对其他FLASH可自改,注意要修改BIOS的驻留地址,现地址为0X1F0000.
3) 对不同的RAM而言,修改SYSINIT.S里的参数.FS44B0Xbios运行地址为0XC7C0000,可在ADS中修改.
4) 波特率为57600
5) ip地址为 192.168.0.1-arm7 Development Board fs44b0x original code : 1) the item under the ADS1.2 compiler, which originated SDT2.51 of debugging. Compiling, I would be grateful if the entire fs44b0xbios copy of the directory c : \ under 2) now only 39 VF160 burned right into the other FLASH, will be changed, attention to the presence of BIOS changes addresses, is located at 0 X1F0000. 3) the different RAM, Lane changes SYSINIT.S parameters. FS44B0Xbios running at 0 XC7C000 0, ADS can be modified. 4) baud rate of 57600 5) ip address 192.168.0.1
Platform: |
Size: 458752 |
Author: zhouchendong |
Hits:
Description: FLASH BIOS擦写工具，对从事PCI BIOS设计方面的工作有帮助！-FLASH BIOS write tools, engaged in the design of PCI BIOS has to help the work!
Platform: |
Size: 2048 |
Author: fansj |
Hits:
Description: award flash bios progra-award flash bios programm
Platform: |
Size: 16384 |
Author: sergey |
Hits:
Description: SST 49LF020 LPC Flash ROM Datasheet
Platform: |
Size: 370688 |
Author: Kumbi
|
Hits: