Location:
Search - can ECU
Search list
Description: CAN是国际上应用最广泛的现场总线之一。最初，CAN被设计作为汽车环境中的微控制器通讯，在车载各电子控制装置ECU之间交换信息，形成汽车电子控制网络。CAN是一种多主方式的串行通讯总线，基本设计规范要求有高的位速率，高抗电磁干扰性，而且能够检测出产生的任何错误。当信号传输距离达到10Km时，CAN 仍可提供高达50Kbit/s的数据传输速率。 由于CAN总线具有很高的实时性能，因此，CAN已经在汽车工业、航空工业、工业控制、安全防护等领域中得到了广泛的应用。-CAN international application of the most extensive one of the fieldbus. Initially, CAN was designed as a vehicle environment of micro-controller communications, in the vehicle electronic control devices to exchange information between ECU, the automotive electronic control network. CAN is a major way over the serial communication bus, the basic design of the demand for a high-speed, high resistance to electromagnetic interference, but also can detect the mistakes. When the signal transmission distance to 10 Km, CAN can provide up to 50 Kbit / s data transmission rate. CAN is due to the high real-time performance, therefore, CAN has in the automobile industry, aviation industry, industrial control, security protection, and other fields have been widely applied.
Platform: |
Size: 977834 |
Author: 12313 |
Hits:
Description: gole车的ecu重建程序。boot room＋控制 ms－8051兼容板。可以直接使用m154控制器。-cars ecu redevelopment processes. Boot control room+ ms-8051-compatible board. M154 can be used directly controller.
Platform: |
Size: 37888 |
Author: 杨骏 |
Hits:
Description: 奥迪A6 2.4T ecu 件号为：mpfi-V6 的ecu改装目标代码。改装目标：加速提高1.2秒左右
最高扭矩出现降低到2475转。
下次再上价值8万元的德国房车赛中使用ecu p/n: M.1.5.4 ecu 改装程序文件。-Audi A6 2.4T ecu Parts : mpfi-V6 ecu modified object code. Modified goals : enhancing about 1.2 seconds maximum torque to be lower than 2475 switch. Next time value of 80,000 yuan on the German touring cars use ecu p/n : M.1.5.4 ecu modified files.
Platform: |
Size: 19456 |
Author: 杨骏 |
Hits:
Description: CAN，全称为“Controller Area Network”，即控制器局域网，是国际上应用最广泛的现场总线之一。最初，CAN被设计作为汽车环境中的微控制器通讯，在车载各电子控制装置ECU之间交换信息，形成汽车电子控制网络。比如：发动机管理系统、变速箱控制器、仪表装备、电子主干系统中，均嵌入CAN控制装置。-CAN, called the "Controller Area Network" LAN controller that is the world's most widely used fieldbus one. Initially, CAN was designed as a vehicle environment microcontrollers communications, the car of the electronic control devices to exchange information between ECU, the automotive electronic control network. For example : engine management systems, transmission controllers, instrumentation and equipment, electronic trunk system, both embedded CAN control devices.
Platform: |
Size: 1217536 |
Author: hsy |
Hits:
Description: 大巴车整车控制器程序
包括CAN通讯，与发动机ECU通信
基于PowerPC-bus TRUCK CAN controller procedures including communications, and communications engine ECU based on PowerPC
Platform: |
Size: 412672 |
Author: 刘伟光 |
Hits:
Description: 是基于柴油发动机的多ecu间，通过CAN通讯的详细开发文档
-diesel engine is based on the multi-ecu, CAN communications through the development of detailed documentation
Platform: |
Size: 4751360 |
Author: 刘伟光 |
Hits:
Description: CAN是国际上应用最广泛的现场总线之一。最初，CAN被设计作为汽车环境中的微控制器通讯，在车载各电子控制装置ECU之间交换信息，形成汽车电子控制网络。CAN是一种多主方式的串行通讯总线，基本设计规范要求有高的位速率，高抗电磁干扰性，而且能够检测出产生的任何错误。当信号传输距离达到10Km时，CAN 仍可提供高达50Kbit/s的数据传输速率。 由于CAN总线具有很高的实时性能，因此，CAN已经在汽车工业、航空工业、工业控制、安全防护等领域中得到了广泛的应用。-CAN international application of the most extensive one of the fieldbus. Initially, CAN was designed as a vehicle environment of micro-controller communications, in the vehicle electronic control devices to exchange information between ECU, the automotive electronic control network. CAN is a major way over the serial communication bus, the basic design of the demand for a high-speed, high resistance to electromagnetic interference, but also can detect the mistakes. When the signal transmission distance to 10 Km, CAN can provide up to 50 Kbit/s data transmission rate. CAN is due to the high real-time performance, therefore, CAN has in the automobile industry, aviation industry, industrial control, security protection, and other fields have been widely applied.
Platform: |
Size: 977920 |
Author: 12313 |
Hits:
Description: 发动机喷油控制程序，就是一个ECU的完整程序，可能对一些同志非常有用，找个发动机，就可以控制-Engine fuel injection control program is a complete ECU procedures, may be very useful for some comrades, to find the engine, you can control
Platform: |
Size: 13312 |
Author: |
Hits:
Description: 先进的发动机管理系统－－ME7-Motronic
ME7系统是目前国内采用的德国BOSCH公司生产的Motronic系列发动机管理系统（Engine Management System 简称EMS）的最先进的一种，与之前的M1和M3系统的最大不同在于ME7系统的控制策略是基于扭矩控制的。
ME7系统的电控单元（EMS ECU）采用了两片高性能CPU，大容量的闪存（Flash Memory），在提高系统运行处理能力和程序、匹配数据升级方面有明显的提高。
电控单元（EMS ECU）中的CPU还集成了CAN总线控制器，与车内其它电子控制系统组成了CAN总线网络，进一步提高了系统性能，并同时也为诊断和维修提供了方便。
此外，ME7系统集成了众多先进的传感器和执行器，可以更加准确、可靠地测量和执行动作，所有这些都为提高整个汽车的综合性能奠定了坚实的基础。
Platform: |
Size: 5614592 |
Author: whr |
Hits:
Description: 以LPC2194为平台开发的整车ECU控制器程序，集成SPI，Can通讯，AD，I/O控制等功能。具有产品级的性能。-LPC2194 as a platform to develop procedures for the vehicle ECU controller, integrated SPI, Can communication, AD, I/O control functions. With product-level performance.
Platform: |
Size: 281600 |
Author: bb |
Hits:
Description: 通过对其他国家对超载问题的治理措施及研究现状的深入分析，详细地分析了超载超限对我国道路运输的影响。为了有效的控制超载现象，必须从根本上解决该问题，在这样的技术手段的背景下。本文提出了把车辆载重信号转化为电信号输出到超载控制器，再由超载控制器判断是否超载，进而向超载限定执行机构发出相应的指令，并通过CAN总线和车辆中的其他智能设备如发动机控制单元ECU进行数据通信，确定出最佳方案控制车辆工况，并通过蓝牙技术无线发送车主信息到车辆管理所，对有交管部门超载车主进行处罚，达到威慑目的。本方案的可实行性比较大，整套系统具有灵巧、可靠、实用、低功耗、智能化等优点，实用用于30吨以上的中、大型载重货车。-Firstly, the thesis has introduced that overload problem had effect on Chinese road transportation in detail, by analysis of foreign farther measure and study status on overload problem. In order to control over loading effective,the problem must be resolved ultimately.Under the background, we Taking AT89C52 monolithic as the care of control circuit. The vehicles comes capacity signal which examines from the sensor transforms as the electricity pulse signal output overload controller, again by the overload controller judges whether overload, by this decision automobile whether goes on the low speed travel, then to the overload defined the implementing agency sends out the corresponding instruction, and though the CAN BUS communion with anther intelligence-devices such as the Engine Control Unit (ECU).Fix on the best way for controlling the vehicles,and with the Bluetooth technology, transmit the information of the owner to vehicles manage department by wireless.The vehicles manage depa
Platform: |
Size: 2115584 |
Author: 陈磊 |
Hits:
Description: 基于CAN总线的汽车控制器ECU的设计开发实例，给设计人员会有很大的帮助-Based on the vehicle CAN Bus ECU controller design and development examples, to the designers will be of great help
Platform: |
Size: 13312 |
Author: lfw |
Hits:
Description: 读取汽车OBD-II系统存储在ECU中的故障码，连接扫描仪就可以使用。-Read automotive OBD-II system is stored in the ECU Fault codes can be used to connect the scanner.
Platform: |
Size: 107520 |
Author: david huang |
Hits:
Description: xcp 是ccp的换代版本,用于汽车ecu标定软件的开发-xcp is an update version of ccp , which is used in the development of ecu software.
Platform: |
Size: 2308096 |
Author: 时宇 |
Hits:
Description: Vector公司提供的CCP协议(CAN Calibration Protocol)的ECU驱动。-CAN Calibration Protocol is used in auto indust. especially for ecu software.
Platform: |
Size: 2924544 |
Author: 浩 |
Hits:
Description: Vector公司的CAN标定协议的介绍，包括CCP协议介绍和ECU侧的驱动编写介绍说明。-Vector s introduction to the CAN calibration protocol.
Platform: |
Size: 235520 |
Author: 浩 |
Hits:
Description: This document originates from ISO international Standards 14230, Section 3 "Diagnostic System -
Keyword 2000 Protocol - Coat Application" and "ISO 15765 part 3 "Diagnostics on CAN - Application
layer services".
This document describes ECU realignment operations, when defects have been identified, and when
those may be corrected through downloading of a new software version.
These realignment operations shall be possible:
• on the vehicle, that is without dismantling the calculator,
• using the vehicle diagnostic bus,
• via a standard diagnostic plug,
• without having to apply an external specific voltage.
The objective is to use the realignment means and procedures:
• in the after-sales networks,
• in assembly plant parks,
• on ECU prototypes used in development phase.-This document originates from ISO international Standards 14230, Section 3 "Diagnostic System-
Keyword 2000 Protocol- Coat Application" and "ISO 15765 part 3 "Diagnostics on CAN- Application
layer services".
This document describes ECU realignment operations, when defects have been identified, and when
those may be corrected through downloading of a new software version.
These realignment operations shall be possible:
• on the vehicle, that is without dismantling the calculator,
• using the vehicle diagnostic bus,
• via a standard diagnostic plug,
• without having to apply an external specific voltage.
The objective is to use the realignment means and procedures:
• in the after-sales networks,
• in assembly plant parks,
• on ECU prototypes used in development phase.
Platform: |
Size: 314368 |
Author: hu |
Hits:
Description: CAN，全称“Controller Area Network”，即控制器局域网，是国际上应用最广泛的现场总线之一。最初，CAN被设计作为汽车环境中的微控制器通讯，在车载各电子控制装置ECU之间交换信息，形成汽车电子控制网络。比如：发动机管理系统、变速箱控制器、仪表装备、电子主干系统中，均嵌入CAN控制装置。 -CAN, full name of the " Controller Area Network" , the Controller Area Network, is internationally the most widely used field bus. Initially, CAN is designed as a vehicle environment, the micro-controller communications, in-vehicle electronic control unit ECU of the exchange of information between the formation of automotive electronic control network. For example: engine management systems, transmission controllers, instrumentation and equipment, electronic backbone of the system are embedded CAN control.
Platform: |
Size: 1149952 |
Author: zhaohaiting |
Hits:
Description: CAN-bus（ Controller Area Network） 即控制器局域网，是国际上应用最广泛的现场总
线之一。最初CAN-bus 被设计作为汽车环境中的微控制器通讯，在车载各电子控制装置ECU
之间交换信息，形成汽车电子控制网络。比如发动机管理系统、变速箱控制器、仪表装备、
电子主干系统中，均嵌入CAN 控制装置。
CAN-bus 是一种多主方式的串行通讯总线，基本设计规范要求有高的位速率，高抗电
磁干扰性而且能够检测出产生的任何错误。当信号传输距离达到10Km 时，CAN-bus 仍可
提供高达5Kbps 的数据传输速率。由于CAN 串行通讯总线具有这些特性，它很自然地在
汽车制造业以及航空工业中受到广泛应用。-Industry CAN-bus Application Protocol
Platform: |
Size: 1087488 |
Author: 温永泽 |
Hits:
Description: S12G CAN Boot Loader Host-ECU Interface(S12G CAN Boot Loader Host-ECU Interface.docx)
Platform: |
Size: 293888 |
Author: 燃烧海贼王
|
Hits: