Location:
Search - 串口烧写
Search list
Description: 这是一个实现向一块ARM板上移植uclinux2.0的程序,通过PC机的串口1可实现向目标板的flash里面写入uclinux2.0- This is a realization transplants uclinux2.0 together to the
ARM board on the procedure, 1 may realize through the PC machine
string mouth to inside goal board flash reads in uclinux2.0
Platform: |
Size: 14372 |
Author: 杨晖 |
Hits:
Description: at91系列通过串口烧写源程序-Itanium series of burning through the serial port source
Platform: |
Size: 161490 |
Author: 江山 |
Hits:
Description: str912芯片的串口烧写程序源代码，采用Ymodem串口通信协议。-str912 Serial chip burning source code using Ymodem serial communication protocol.
Platform: |
Size: 280846 |
Author: 孙山 |
Hits:
Description:
Platform: |
Size: 15802512 |
Author: xwmxw@126.com |
Hits:
Description: TMS320F2812 dsp 通过SCI串口烧写片内FLASH的烧写算法文件，是必不可少的资源。今天刚刚实验通过。
Platform: |
Size: 2773344 |
Author: peipei02431@163.com |
Hits:
Description: 详细的串口烧写FLASH教程，经过实验验证好用。
Platform: |
Size: 202327 |
Author: ppp2006@yahoo.com.cn |
Hits:
Description: 《Flash Programming Solutions for the TMS320F28xxx DSCs》---spraal3.pdf
《Running an Application from Internal Flash Memory on the TMS320F28xxx DSP》---spra958.pdf
《Copying Compiler Sections From Flash to RAM on the TMS320F28xxx DSCs》---spraau8.pdf
《TMS320F281x Boot ROM Serial Flash Programming》---spraaq2.pdf
Platform: |
Size: 4676415 |
Author: yukui_911@126.com |
Hits:
Description: 《TMS320F281x Boot ROM Serial Flash Programming》源码
包括Appcode、CKFA、EICT三部分软件例程
Platform: |
Size: 1723966 |
Author: yukui_911@126.com |
Hits:
Description: 串口烧写DM368工具.zip
Platform: |
Size: 82977 |
Author: junqiaoli@163.com |
Hits:
Description: 进行arm－linux嵌入式系统开发时，需要将文件烧写到flash上，在网上可以找到win下的烧写程序，但多数情况下开发环境应该是在linux下，烧写程序时切换到win下很不方便，使用该程序可以在linux下直接对flash进行烧写 该程序运行后将一个小的for arm的c程序通过串口传送到arm开发板上，使用该小程序与主机端通信，将主机传送信息烧写到flash上- Carries on when arm- linux inserts the type system
development, needs the document fever to write on flash, is on-line
may find under win the fever to write the procedure, but in the most
situations the development environment should be under linux, the
fever writes when the procedure cuts under win not to be very
convenient, uses this procedure to be allowed directly to carry on the
fever under linux after flash to write this procedure movement to
transmit orally a small for arm c procedure through the string
delivers on the arm development board, uses this script and the main
engine end correspondence, writes the main engine pass-along message
pam fever on flash
Platform: |
Size: 1207296 |
Author: 代进 |
Hits:
Description: at91系列通过串口烧写源程序-Itanium series of burning through the serial port source
Platform: |
Size: 160768 |
Author: |
Hits:
Description: 这是一个实现向一块ARM板上移植uclinux2.0的程序,通过PC机的串口1可实现向目标板的flash里面写入uclinux2.0- This is a realization transplants uclinux2.0 together to the
ARM board on the procedure, 1 may realize through the PC machine
string mouth to inside goal board flash reads in uclinux2.0
Platform: |
Size: 16384 |
Author: 杨晖 |
Hits:
Description: ：ARM Linux 在AT91RM9200 平台上的移植，步骤包括下载安装内核源码、建立交叉编译环境及以压缩或非压缩方式配置和编译内核。其文件系统的建立及程序开发均在宿主机上完成，再通过串口、网口或者JTAG口烧写至目标板。-: AT91RM9200 ARM Linux platform in the transplant, steps include download and install the kernel source code, the establishment of cross-compiler environment and to reduce non-compressed mode and kernel configuration. Its file system and the establishment of procedures for the development of both the hosts completed, and through the serial port. JTAG net mouth or mouth-burning target board.
Platform: |
Size: 285696 |
Author: 卢桂荣 |
Hits:
Description: str912芯片的串口烧写程序源代码，采用Ymodem串口通信协议。-str912 Serial chip burning source code using Ymodem serial communication protocol.
Platform: |
Size: 280576 |
Author: 孙山 |
Hits:
Description: DNW0.50A软件的源代码，在ARM2410上面通过串口和USB口烧写操作系统镜像时必须用到的软件。-DNW0.50A software source code, in the ARM2410 above the mouth through the serial port and USB programmer to be used for mirroring the operating system software.
Platform: |
Size: 2882560 |
Author: 汤林 |
Hits:
Description: 通过三星ARM7芯片S3C44B0，将RAM数据烧写到Flash的源码，RAM数据可通过串口从主机下载。-Samsung ARM7 chip through S3C44B0, the programmer RAM data to the Flash source code, RAM data can be downloaded from the host through the serial port.
Platform: |
Size: 98304 |
Author: SouthSand |
Hits:
Description: TMS320F281x芯片进行在线(in-circuit)串行Flash烧写，适用于远程更新程序。给出了详细步骤，图文说明。DSP2812 PROGRAMM BY SCIA.(DSP2812 PROGRAMM BY SCIA.)
Platform: |
Size: 1421312 |
Author: sitp001
|
Hits:
Description: 使用外设：串口线一跟，通过COM1连接PC
** 实验名：【B】USART_TEST
** keil MDK-ARM Standard Version：V4.22A
** 软件库(keil) Version: V2.0.1
** 固件库(ST) Version: V
*************************************/
/***********************************
** 实验现象：
1、首先进行常规配置(RCC、NVIC、GPIO)，然后配置串口1(115200baud 8位数据位 1位停止位 无奇偶校验位)
2、通过对USART1写操作，完成了向PC发送字符串的功能
3、此实验对串口的操作都是通过调用ST固件库，
** 实验说明：
1、打开超级终端，进行相同的设置
2、通过JLINK烧写程序，按下“RESET”键，可以看到PC接收到的字符串
“welcome to STM32”(using peripherals: the serial port line is a heel, and the PC is connected to the COM1
* * * experimental Name: [B] USART_TEST
* * * keil MDK-ARM Standard Version:V4.22A
* * software library (keil) Version: V2.0.1
* * firmware library (ST) Version: V
*************************************/
/***********************************
* * experimental phenomena:
1, first of all the regular configuration (RCC, NVIC, GPIO), and then the serial port 1 (115200baud 8 bit data bit, 1 bit stop bit and no parity bit)
2. By writing to USART1, the function of sending strings to PC is completed
3. The operation of this experiment on the serial port is by calling the ST firmware library.
* * the experiment shows that:
1. Open the super terminal and make the same setup
2, through the JLINK burning program, press the "RESET" key, you can see the string received by PC
Welcome to STM32)
Platform: |
Size: 653312 |
Author: 72521
|
Hits:
Description: 程序是3个关于51串口的实验程序包，包括工程文件，c源文件，HEX烧写文件。3个实验分别是：-51串口通讯；-51串口通讯中断应用；-51串口测温电脑显示。(51 Serial Communication;The application of serial communication interrupt;Serial temperature measuring computer display)
Platform: |
Size: 86016 |
Author: AKARUN
|
Hits: