Search - red lights vhdl

Search - red lights vhdl - List

[VHDL-FPGA-Verilog] nclight DL : 0: 利用硬件描述语言VHDL设计交通灯电路,设计一个十字路口交通灯控制器，东西、南北方向有红灯、黄灯、绿灯，持续时间分别为45、5、40秒。-use VHDL design of traffic lights at the circuit, the design of traffic lights at a crossroads controller East and West, North-South direction of a red light, yellow light, green light, the duration of 45, morphine seconds.
Date : 2025-12-28 Size : 1kb User : 空气
[VHDL-FPGA-Verilog] traffic_control DL : 0: 设计制作一个用于十字路口的交通灯控制器有一组绿、黄、红灯用于指挥交通，绿灯、黄灯和红灯的持续时间分别为20秒、5秒和25秒；当有特殊情况（如消防车、救护车等）时，两个方向均为红灯亮，计时停止，当特殊情况结束后，控制器恢复原状态，继续正常运行-design a crossroads for the traffic signal controller is a group in green, yellow and red lights to direct traffic. green, yellow and red, respectively for the duration of 20 seconds, five seconds and 25 seconds; When special circumstances (such as fire engines, ambulances and the like), in both directions were red light, stop time, when the special circumstances after the controller to restore the original state, continue normal operations
Date : 2025-12-28 Size : 2kb User : 飘来的南风
[VHDL-FPGA-Verilog] vhdl_traffic DL : 0: 模拟交通灯实验模拟路口的红黄绿交通灯的变化过程，用LED 灯表示交通灯，并在数码管上显示当前状态剩余时间。-simulation experiment simulated traffic lights junction of red, yellow, and green traffic lights to the process of change, said LED lights for traffic lights, and the digital tube display the current state of the remaining time.
Date : 2025-12-28 Size : 195kb User : 赵海东
[VHDL-FPGA-Verilog] traffic DL : 0: xilinx完成一个模拟的十字路口交通信号灯，主干道上的绿灯时间为30s，支干道的绿灯时间为30s，且交通灯从绿变红时，有6s黄灯亮的时间间隔。当然每种状态的倒计时的时间值应显示到LED数码管上。-Xilinx completed in a simulated traffic lights at a crossroads, a main road on the green time for the 30s, branch roads green time for 30s, and red traffic lights from green when 6s yellow light time interval. Of course, each state s countdown time value should be shown on the LED digital tube.
Date : 2025-12-28 Size : 93kb User : haolj
[VHDL-FPGA-Verilog] trafficlightvhdlcode DL : 0: VHDL实现的交通灯程序，可以定时南北和东西方向的交通灯信号，控制红黄绿各灯亮的时间，并考虑紧急情况如有救护车通过-VHDL procedures realize the traffic lights, you can regularly north-south and east-west direction of the traffic lights signal control red, yellow, and green lights all the time, and to consider the adoption of an emergency if the ambulance
Date : 2025-12-28 Size : 568kb User : dongming
[VHDL-FPGA-Verilog] ledcontrol DL : 0: 该程序为用vhdl语言编写的彩灯控制程序！通过状态机实现三个彩灯的状态装换，红灯亮2秒，绿灯亮3秒，黄灯亮1秒！时钟频率为1HZ！通过该程序也可以改成交通灯的情况-The procedure for the use of VHDL language Lantern control procedures! Through the state machine to achieve the status of three lantern-for-loaded, two seconds the red light, green light is 3 seconds, 1 seconds yellow light! Clock frequency of 1HZ! Through the program can also change the situation of traffic lights
Date : 2025-12-28 Size : 1kb User : 吴明星
[VHDL-FPGA-Verilog] travel DL : 0: 自己做的vhdl课程设计，交通灯：实现主干道倒计时，分别为30,20,5秒，分情况：当主干道有车时，红黄绿交替，当只一个道路上有车时，那个道的交通灯变绿色，利用max+plus2做成，使用flex8000,epf8282alc84_4只用加一个38译码器模块即可，使用别的板子也可以运行-VHDL to do their own curriculum design, traffic lights: the realization of the trunk road countdown, 30,20,5 seconds, respectively, sub-cases: When there are car trunk, red, yellow, and green alternately, when there is only a road car, the Road change traffic lights green, the use of max+ plus2 make, use flex8000, epf8282alc84_4 only 38 plus a decoder module can, use the other board can also run
Date : 2025-12-28 Size : 517kb User : 安治州
[VHDL-FPGA-Verilog] jiaotongdeng DL : 0: 1). 用红、绿、黄三色发光二极管作信号灯。主干道为东西向，有红、绿、黄三个灯；支干道为南北向，也有红、绿、黄三个灯。红灯亮禁止通行；绿灯亮允许通行；黄灯亮则给行驶中的车辆有时间停靠到禁行线之外。 2).由于主干道车辆较多而支干道车辆较少，所以主干道绿灯时间较长。当主干道允许通行亮绿灯时，支干道亮红灯。而支干道允许通行亮绿灯时，主干道亮红灯，两者交替重复。主干道每次放行50秒，支干道每次放行30秒。在每次由亮绿灯变成亮红灯的转换过程中间，需要亮5秒的黄灯作为过渡，以使行驶中的车辆有时间停靠到禁行线以外。 3). 能实现正常的、即时显示功能。用DE2上的四个七段数码管作为倒计时显示器。分别显示东西、南北方向的红灯、绿灯、黄灯时间。 4).能实现特殊状态的功能显示。设S为特殊状态的传感器信号，当Ｓ=1时，进入特殊状态。当Ｓ=0时，退出特殊状态。按S后，能实现特殊状态功能：（1）显示器闪烁；（2）计数器停止计数并保持在原来的数据；（3）东西、南北路口均显示红灯状态；（4）特殊状态结束后，能继续对时间进行计数。 5).能实现总体清零功能。按下R后，系统实现总清零，计数器由初始状态开始计数，对应状态的指示灯亮。 -1). With red, green, yellow three-color light-emitting diodes for lights. For the east-west trunk road, has red, green, yellow three lights support for the north-south trunk road, there are red, green, yellow three lights. Red light curfew green permit passage yellow light is to the moving vehicles have the time of call to cut outside the lane. 2). Because of the trunk road vehicles more vehicles and less trunk extension, so a longer green time of a main road. When the main road access permit a green light when the trunk road red sticks. Permit access roads and support a green light when the trunk road red, the two alternating repetition. Allowed 50 seconds for each trunk, branch trunk release each 30 seconds. At each green light into red by the conversion process between the need for five seconds of yellow light as a transitional measure to enable the moving vehicles have the time of call to ban outside lane. 3). To achieve a normal, real-time display. Using DE2 four seventh
Date : 2025-12-28 Size : 2kb User : 靓仔
[VHDL-FPGA-Verilog] sy9 DL : 0: 交通灯 VHDL 程序，程序功能：红灯绿灯各9秒，黄灯3秒-Traffic lights VHDL program, the program features: 9 seconds of red light and green light, 3 seconds of yellow light
Date : 2025-12-28 Size : 1kb User : felix
[VHDL-FPGA-Verilog] traficlight DL : 0: 小学期做的交通灯程序，实现红，黄，绿灯按实际情况比例显示，黄灯有闪烁功能；系统有复位和紧急暂停功能-Primary process of doing the traffic lights to achieve red, yellow, green ratio of the actual situation shows that there are flashing yellow light function system reset and emergency Pause
Date : 2025-12-28 Size : 2kb User : 东
[VHDL-FPGA-Verilog] VHDL DL : 0: 2人抢答器简易循环彩灯（红灯3s，绿灯2s，黄灯1s）交通灯-2 Responder simple cycle lights (red 3s, green 2s, yellow 1s) traffic lights
Date : 2025-12-28 Size : 146kb User : yu
[VHDL-FPGA-Verilog] traficlight DL : 0: 交通灯程序，有红绿黄LED输出、蜂鸣器输出及数码管时间显示输出。晶振采用48MHz。-Traffic lights program, a red, green and yellow LED output, buzzer output, and digital time display output. Crystal with 48MHz.
Date : 2025-12-28 Size : 437kb User : 夏江南
[VHDL-FPGA-Verilog] jiaotongdeng-VHDL DL : 0: with two sets of red, yellow, and green lights as the two directions of red, yellow, green with two sets of digital control things and north-south direction as a countdown to show time for the red light 45 seconds 50 seconds green, yellow 5 seconds the actual traffic light in accordance with the rules, so that red, yellow, green and-(1) with two sets of red, yellow, and green lights as the two directions of red, yellow, green (2) with two sets of digital control things and north-south direction as a countdown to show time for the red light 45 seconds 50 seconds green, yellow 5 seconds (3) the actual traffic light in accordance with the rules, so that red, yellow, green and
Date : 2025-12-28 Size : 7kb User : 谢昊
[VHDL-FPGA-Verilog] traffic-light-PDF DL : 0: 交通灯东南西北四个方向的红，黄，绿三色灯的控制方案VHDL编程-Four corners of traffic lights red, yellow, and green lights VHDL programming control program
Date : 2025-12-28 Size : 1.01mb User : 陈莉
[VHDL-FPGA-Verilog] light DL : 0: 道路交通灯VHDL源代码，红黄绿三种交通灯四个路口的程序设计。下载到实验板上实现交通灯的切换-Road traffic lights VHDL source code, four red, yellow, and green traffic light intersections program. Downloaded to the experimental realization of traffic lights switch
Date : 2025-12-28 Size : 427kb User : ivy
[VHDL-FPGA-Verilog] VHDL-traffic-light DL : 0: VHDL源代码以及仿真结果，全面的交通灯（红绿灯）系统制作介绍，并附有代码注释-VHDL source code and simulation results, a comprehensive traffic lights (red light) system is introduced, and a code Notes
Date : 2025-12-28 Size : 113kb User : 文子
[VHDL-FPGA-Verilog] VHDL DL : 0: 基于VHDL语言的交通灯设计:通过状态机设计实现交通灯的红黄绿三种灯显示.其功能包括:红绿黄灯显示,倒计时功能,测试功能,手动控制功能.-Based on VHDL design of traffic lights: red, yellow, and green traffic lights, three lights through the state machine design features include: red, green, yellow, countdown function, test function, manual control functions.
Date : 2025-12-28 Size : 801kb User : 小雪
[VHDL-FPGA-Verilog] TrafficLight DL : 0: 十字路口交通灯VHDL实现。功能：红绿黄状态的基本转换，红绿灯时间交替变化，黄灯缓冲。-Crossroads traffic lights VHDL realization. Function: red, green and yellow state the basic conversion time alternating traffic lights, yellow cushion.
Date : 2025-12-28 Size : 23kb User : novice
[VHDL-FPGA-Verilog] VHDL DL : 0: 有一个实际的十字路口设置有东西、南北两个方向的干道,为确保车辆安全通行,在每条干道的每个入口设置了一组两位数码管显示装置和四组红、绿、黄信号灯,分别用来指示东西方向直行、南北方向直行、东西方向转弯和南北方向转弯；同时设有紧急处理状态，数码管显示可有人工控制，并设有初始化功能。-There is a real crossroads to set something, the north-south trunk road in both directions, to ensure the safe passage of vehicles at every entrance of each trunk group set up two digital display devices and four sets of red, green and yellow lights were used to indicate the direction of things straight, straight north-south direction, the direction of the turn and the north-south direction things turn also features a state of emergency treatment, digital display can have manual control, and has initialization function.
Date : 2025-12-28 Size : 914kb User : leitao
[VHDL-FPGA-Verilog] vhdl DL : 0: （1）在十字路口的两个方向上各设一组红、绿、黄灯，显示顺序依次为红灯-绿灯-黄灯-红灯。南北方向和东西方向红灯绿灯相反。南北方向红灯显示时间为东西方向黄绿灯显示时间的总和，同理，东西方向红灯显示时间为南北方向黄绿灯显示时间的总和。（2）设置一组数码管，以倒计时的方式显示允许通行或禁止通行的时间，其中绿灯、黄灯、红灯的持续时间分别是7s、2s和9s。 -(1) a set of red, green and yellow lights are arranged in each of the two directions of the intersection. North-south direction and east-west direction of traffic lights opposite. North and south direction of the red light shows the sum of the time for the east-west direction of the traffic light display time, the same thing, the direction of the red light to show the north and south direction of the green light to display the total time. (2) to set up a set of digital tube, in order to display the countdown to allow passage or prohibit the passage of time, where the green light, yellow light, red light duration are 7S, 2S and 9s.
Date : 2025-12-28 Size : 1.02mb User : 陈杰

« 12 3 »