Search - sends - CodeBus

Search - sends - List

[DSP program] sci DL : 0: 该程序为 SCI 内部自测试程序，程序首先发送数据 0x00 到0xFF，然后接收数据,并将接收到的数据与发送的数据进行比较测试变量：接收数据中错位数据的个数 ErrorCount -The program for the SCI internal self-test program, the program sends data first 0x00 to 0xFF, and then receive data, and the received data and sends the data to compare test variables: displacement data to receive data in the number of ErrorCount
Date : 2025-12-25 Size : 2kb User : 李响
[DSP program] 08_Sci03 DL : 0: 通过SCI与PC机的串口通信来控制LED D1-D6的运行方式。根据通信协议，PC机发送一条指令给2812，2812通过SCIA接收到指令后，进行解析，然后根据PC机的指令来运行D1-D6。-SCI and the PC through serial communication to control the LED D1-D6 runs. According to protocol, PC sends a command to 2812,2812 to the instruction received by SCIA, parsing, and then the PC command to run D1-D6.
Date : 2025-12-25 Size : 414kb User : yu hao
[DSP program] Sci DL : 0: 内包含DSP2812SCIA模块和PC机进行串口通信的一个工程范例，该工程通过等待PC机上的串口调试软件向DSP发送数据，DSP接收到上位机发送的数据之后，将这些数据发回PC机，显示在串口调试软件中。 DSP开发者通过该工程可以学习到SCI通信原理，了解查询方式实现串口通信的优缺点，实现采用查询方式的SCI串口通信。-It contains a DSP2812SCIA module and PC machines carry out serial communication of an engineering example, via waiting for a PC serial port debug software to the DSP to send data, the DSP receiver to the host computer sends data, these data are issued back to the PC, displayed on theserial debugging software. DSP developers can learn through this project to SCI communication theory to understand the query to achieve the advantages and disadvantages of the serial communication, query the SCI serial communication.
Date : 2025-12-25 Size : 336kb User : jen
[DSP program] CAN DL : 1: 基于STM32的CAN通信：双 CAN 测试实验（中断模式），采用两块实验板充当某次 CAN 通信过程的主动发送和被动接受节点。主动设备首先发送信号“ABCD”，若被动设备接收到这个信号后，会向发送出“DCBA”。若主设备成功收到答复信号“DCBA”，则通过 USART1 向终端中打印信息。本次实验中，主动设备在被动设备之后运行。-Based on the STM32 CAN Communication: Dual CAN testing laboratories (interrupt mode), using two experimental board acts as the initiative to send a second CAN communication process and the passive acceptance of nodes. Active device first sends a signal " ABCD" , if the passive device receives this signal will be sent out to " DCBA" . If the master device successfully receives a reply signal " DCBA" , through USART1 print information to the terminal. In this experiment, the active devices running after passive devices.
Date : 2025-12-25 Size : 940kb User : lulu
[DSP program] 07_Sci02 DL : 0: 使用SCIA模块和PC机进行串口通信，等待PC机上的串口调试软件向DSP发送数据，DSP接收到上位机发送的数据之后，将这些数据发回PC机，显示在串口调试软件中。-Using SCIA module and PC serial port communication, Wait for the PC serial debugging software to send data to DSP, after DSP receiving the PC sends data, send the data back to the PC,displaying in the serial debugging software.
Date : 2025-12-25 Size : 465kb User : 小鹏
[DSP program] 07_Sci02 DL : 0: 使用SCIA模块和PC机进行串口通信，等待PC机上的串口调试软件向DSP发送数据，DSP接收到上位机发送的数据之后，将这些数据发回PC机，显示在串口调试软件中。-Using SCIA module and PC serial port communication, waiting for the PC serial debugging software to send data to the DSP, DSP after receive the PC sends data, the data back to the PC, display in the serial debugging software.
Date : 2025-12-25 Size : 335kb User : chenzhuo
[DSP program] SharedMem DL : 0: 多核图像灰度转换的程序，本程序主要做了以下几个任务：（1）核0创建共享内存，将数据写入内存，然后通过Notify将内存地址发送给从核。（2）从核（1至7核）接收核0的通知，打开内存地址，读取数据。-Multi core image grayscale conversion procedures, the procedures are mainly done the following tasks: (1) the kernel 0 creates the shared memory, writes the data to the memory, and then sends the memory address to the slave by Notify. (2) the core (1 to 7 nuclear) to receive the notice of the nuclear 0, open the memory address, read data.
Date : 2025-12-25 Size : 122kb User : qinbo
[DSP program] SCICode DL : 0: 完整dsp28335工程，从上位机收到数据以及回传发送数据；(The complete DSP28335 project receives data from the upper computer and sends back the data.)
Date : 2025-12-25 Size : 208kb User : jie_