Search - bus - CodeBus

Search - bus - List

[uCOS] S3C44B0X CAN总线通讯 DL : 0: 按PC键盘通过超级终端发送数据，开发板将接收到的数据通过CAN总线转发，在另一个超级终端上显示数据来实现数据传输，源代码已经调试可用，希望能对大家有所帮助。-PC keyboard adopted by the Super Terminal send data, the board will receive the data transmitted through the CAN bus, in another super-terminal display the data to achieve data transmission and debug source code has been available, we want to help.
Date : 2025-12-29 Size : 266kb User : 朱君
[uCOS] ucosII_i2c DL : 0: 周立功公司的ARM开发板LPC2119环境下，I2C总线读写驱动程序。该代码可以重入。可直接使用无须修改。-the development board LPC2119 ARM environment, I2C bus driver to read and write. The code can go back to. Direct access needed to be changed.
Date : 2025-12-29 Size : 202kb User : 周冬生
[uCOS] ucos2 can总线通讯 DL : 0: 编程实现MCP2510 的CAN 总线通讯；两个UP-NetARM3000 通过CAN 总线相连接。ARM 监视串行口，将接收到的字符发送给另一个开发板并通过串口显示（计算机与开发板是通过超级终端通讯的）。即按PC 键盘通过超级终端发送数据，开发板将接收到的数据通过CAN 总线转发，再另一个PC 的超级终端上显示数据-Programming MCP2510 CAN bus communication; Two UP-NetARM3000 CAN bus link. ARM surveillance serial port, will receive the characters sent to another development board and adopted Serial Display (Computer and development board through the Super Terminal Communication). According to PC keyboards through the Super Terminal send data, the board will receive the data transmitted through the CAN bus, then another Super PC terminals display the data
Date : 2025-12-29 Size : 21kb User : 陈小平
[uCOS] ucos2 显示驱动 DL : 0: 并用编程实现两种LCD 驱动方式的基本原理和方法；1．用总线方式直接驱动带有驱动模块的LCD。 2．用ARM 内置的LCD 控制器来驱动LCD。-programming using two LCD driver means the basic principles and methods; 1. With direct bus driver with the LCD driver modules. 2. ARM with a built-in LCD controller to drive the LCD.
Date : 2025-12-29 Size : 17kb User : 陈小平
[uCOS] SPIBUS_LPC2200 DL : 0: LPC2200 + ucOS-II平台SPI总线驱动中间件程序 C语言版-LPC2200 ucOS-II platform SPI bus driver middleware C-language version
Date : 2025-12-29 Size : 48kb User : 杨羽凌
[uCOS] can_communication DL : 0: 2410开发板上can总线的通讯实验，使用ADS1.2集成开发环境-2410 development board can Bus communication experiments, the use of ADS1.2 Integrated Development Environment
Date : 2025-12-29 Size : 52kb User : 波波
[uCOS] SPI_arm_drive DL : 0: SPI总线驱动，可驱动FLASH和数码管等设备。 LPC基于2138芯片的中间件-SPI Bus Driver, Flash drives and digital control, and other equipment. LPC based on the 2138 chip Middleware
Date : 2025-12-29 Size : 49kb User : 高明
[uCOS] uCOS-IIModem_example DL : 0: 串口驱动 MODEM接口模块 I2C总线模块 SPI总线模块-Serial I2C Bus Interface Module Module Module SPI Bus
Date : 2025-12-29 Size : 426kb User : 白哈
[uCOS] SPIDRIVE DL : 0: 一个基于LPC214X的SPI 总线驱动程序-a LPC214X on the SPI Bus Driver
Date : 2025-12-29 Size : 2kb User : 洛美林
[uCOS] arm_MODBUS_RTU DL : 0: 基于飞利浦ARM的modbus工业总线开发，适用于触摸屏，PLC的通信，方便移植。-Philips ARM based on the Modbus industrial bus development, applied to touch screen, PLC communications to facilitate transplantation.
Date : 2025-12-29 Size : 233kb User : 季中
[uCOS] USB_I2C_program1 DL : 0: 移植了可运行于arm lpc2294下的uc/os2，且具有完整的pdiusbd12 通信驱动程序，能进行上下位机的通信，还完成了iic总线的控制，完成eeprom的读写。 -Transplantation can be run under the arm lpc2294 in uc/os2, and has a complete communications PDIUSBD12 driver, can be upper and lower machine communications, has also completed the IIC bus control, the completion of the read-write EEPROM.
Date : 2025-12-29 Size : 116kb User : nwpu2005
[uCOS] canbuscommunication DL : 0: 此软件包为CAN总线通讯源代码，硬件平台为ARM2140开发板，操作系统使用uCOS。-This package CAN bus communication for the source code, the hardware platform for the ARM2140 development board, the operating system to use uCOS.
Date : 2025-12-29 Size : 258kb User : 田清
[uCOS] IIC1 DL : 0: iic总线控制led,我就这是根据linux下面的驱动自己改的，在ucos下运行-IIC bus control led, I have linux on this is based on the following drive their own change in uCOS run
Date : 2025-12-29 Size : 234kb User : wangyao
[uCOS] LM3S_uCOS2_485 DL : 0: LM3S_uCOS2 for 485总线源代码-LM3S_uCOS2 for 485 bus source code
Date : 2025-12-29 Size : 40kb User : yangliang
[uCOS] can DL : 0: Can总线的控制协议，主要是用来实现以Can总线协议的方式进行的数据传输-Can Bus control protocol is primarily used for Can bus protocol in order to realize the way the data transmission
Date : 2025-12-29 Size : 17kb User : 刘义春
[uCOS] Usb_E2PROM DL : 0: 利用基于嵌入式实时操作系统uc/os_II的USB软件包与I2C总线软件包构造的USB-E2PROM编程器。-Embedded real-time operating system based on the uc/os_II the USB package structure and package the I2C bus USB-E2PROM programmer.
Date : 2025-12-29 Size : 428kb User : 谢广龙
[uCOS] Exp5canbusexam DL : 0: 这是三星公司arm9 2410编写的can总线驱动程序，采用codewarrior编写-This is Samsung' s prepared arm9 2410 bus driver can use to prepare codewarrior
Date : 2025-12-29 Size : 287kb User : 老马
[uCOS] can DL : 0: 基于ARM9 S3C2410下ucos-II的CAN总线驱动函数，需要正确设置ADS1.2下的配置否则无法编译通过，配置ADS1.2的文章网上有很多，参考下就可以了。-ARM9 S3C2410 based ucos-II under the CAN bus driver function, the need for the correct configuration settings of ADS1.2 otherwise it is impossible to compile through the configuration ADS1.2 There are many articles online reference on it.
Date : 2025-12-29 Size : 257kb User : 沈
[uCOS] MiNiISA DL : 0: 基于ARM lpc2400的ISA总线开发源代码。带操作系统。-The ISA-bus based on ARM lpc2400 development of source code. With the operating system.
Date : 2025-12-29 Size : 68kb User : 王树茂
[uCOS] shiyan DL : 0: 该文件是基于周立功的EAZYARM开发板，uCOS II操作系统。实现数据采集、数据存储、I2C总线控制、LED时钟显示、键盘输入、网络通信等多任务。-The document is based on weekly contribution in EAZYARM development board, uCOS II operating system. Data acquisition, data storage, I2C bus control, LED clock display, keyboard input, network communications, multi-tasking.
Date : 2025-12-29 Size : 550kb User : 王懿

« 12 »