Search - curve - CodeBus

Search - curve - List

[SCM] multichemistry_battery_charger_reference_design_17 DL : 0: 一种采用CYPRESS的PSOC混合信号控制其系列的智能型充电器设计方案，可支持多种电池理性，根据电池充电曲线进行调整，开发IDE为CYPRESS的PSOC Designer，硬件为PSOC。-use of a PSOC mixed-signal control of its series of smart charger design that can support multiple battery rational, battery charging curve adjustment, IDE for the development of the PSOC Designer CYPRESS, hardware PSOC.
Date : 2025-12-25 Size : 1.48mb User : 柳如飞
[SCM] lcd19264 DL : 0: c51和汇编混合编程，lcd 192×64 画曲线-decoder and compilation of mixed programming, LCD 192 x 64 paintings curve
Date : 2025-12-25 Size : 4kb User : 尚淮
[SCM] 悬挂系统 DL : 0: 通过利用两台步进电机实现悬挂物体运动轨迹的控制，实现从点对点的运动、任意设定圆心的圆周运动，曲线运动。-through the use of two stepper motor to achieve flag objects trajectory control from a point-to-point movement, arbitrary set of circular motion Center, curve campaign.
Date : 2025-12-25 Size : 2kb User : 陈俊涛
[SCM] 画贝塞尔曲线 DL : 0: 在汇编程序中很难控制图形的变化，要用到好多的寄存器，本例就是用汇编画贝塞尔曲线-in the compilation process is difficult to control the graphics change, we had to use a lot of the register, this example is using Bezier curve drawing compilation
Date : 2025-12-25 Size : 10kb User : 吴忠
[SCM] 通用伺服电机控制 DL : 0: 通用伺服电机控制原理及C源码, 内含：关于步进伺服电机加速曲线计算器的使用说明，举例说明参数使用方法的步进电机控制的具体编程。供参考，PDF文档。步进、伺服电机加速曲线计算器修正版。-generic servo motor control principle and C source, consisting of : Stepping on the servo motor speed up the curve for use of the calculator, examples of the use of parameters of the stepper motor control specific programming. For information, PDF documents. Stepping, servo motor acceleration curve calculator revised version.
Date : 2025-12-25 Size : 448kb User : 苏先生
[SCM] bujinmotor_code DL : 0: 1、有单，和单双两种旋转模式。2、可以选择置数、和连续。两种控制模式。3、按梯形曲线加速和减速。 4、所有的置数，及速度，都能通过数字显示。 -one, single, and both single-and double-rotation mode. 2, we can choose a few home, and continuous. Two control mode. 3, trapezoid curve acceleration and deceleration. 4, all the home number, and speed, can be settled through figures show.
Date : 2025-12-25 Size : 59kb User :
[SCM] kzbujindianji DL : 0: 控制步进电机项目程序：综合考虑工作模式、加速启动，减速停止曲线；以及置步数等因素，决定在该时刻，电机的驱动速度。-stepper motor control project : considering the mode, speed up start, stop slowdown curve; home and steps and other factors, the decision of the moment, the motor-driven speed.
Date : 2025-12-25 Size : 4kb User : 马亮
[SCM] 89c52-comunicate-VB DL : 0: 简单的VB与单片机通讯,实时采集PROTUS函数发生器的的数据,在VB中进行曲线显示.-simple VB and SCM communications, real-time acquisition PROTUS function generator data VB for the curve.
Date : 2025-12-25 Size : 6kb User : 309025101
[SCM] xifenquxian DL : 0: 步进电机200细分曲线值,奉献给大家, 自己计算要一下午才可能算完-Stepper motor 200 breakdown curve values, dedication to the U.S., their calculation should only be considered one afternoon END
Date : 2025-12-25 Size : 5kb User : ly
[SCM] Squxianceshi DL : 1: 一个S曲线加速测试程序,测试步进电机加速-An S curve acceleration test procedures, test stepper motor to accelerate
Date : 2025-12-25 Size : 172kb User : pawo
[SCM] 1-1 DL : 0: 简单C学习手把手学C51,用C编写的工程控制程序，算法采用PID,具有参数设置，保存文件，实时显示曲线的功能。 -Simple to learn hands-C study C51, prepared by C project control procedures, the algorithm using PID, with the parameter settings, save the file, real-time display of the function curve.
Date : 2025-12-25 Size : 1kb User : 狼客基地
[SCM] NIHE DL : 0: 在c8051f015单片机上实现最小二乘法曲线拟合算法，开发环境是KEIL 7.50.-C8051f015 realize single-chip microcomputer in the least squares curve fitting algorithms, the development environment is KEIL 7.50.
Date : 2025-12-25 Size : 45kb User : czay3j704
[SCM] dso DL : 0: 简易示波器 (采样点在屏上显示虚线曲线）-Simple oscilloscope (sampling points in the screen display dashed curve)
Date : 2025-12-25 Size : 425kb User : hangyinli
[SCM] bppid DL : 0: bppid源程序直接运行可仿真出结果包括误差曲线跟踪曲线参数自整定曲线-bppid source can be directly run the simulation results, including tracking error curve curve parameter self-tuning curve
Date : 2025-12-25 Size : 1kb User : zhaozhenjiang
[SCM] AdaptivePIDcontrolbasedonRBFIdentification DL : 0: 结合rbf 的pid控制原码可仿真实现结果有误差曲线跟踪曲线参数整定曲线等-Rbf combination of the pid control source can realize the results of simulation have tracking error curve curve curve parameter tuning, etc.
Date : 2025-12-25 Size : 1kb User : zhaozhenjiang
[SCM] LCD_CURL DL : 0: 在128*64点阵液晶屏上显示曲线，其中的行列地址可以根据实际需要改变-128* 64 dot matrix LCD display curve, in which the ranks of the address can be changed according to actual needs
Date : 2025-12-25 Size : 2kb User : 李杰
[SCM] pid-p DL : 0: 运行该程序后系统的阶跃响应曲线，如图8所示：仿真结果表明，随着Kp增大，系统的超调量加大，系统响应速度加快。但随着KP的增大，稳定性能变差。 -Run this program after the system step response curve, as shown in Figure 8: Simulation results show that with increasing Kp, the system increased the overshoot, the system response speed. However, with increasing KP, stable performance variation.
Date : 2025-12-25 Size : 11kb User : lanyu
[SCM] LCD12864-Temperature-curve DL : 0: 89C51单片机模块温度采集仿真程序，LCD1286显示温度曲线，protues仿真-8051 microcontroller module temperature acquisition simulation program, display the temperature curve on LCD1286 , simulation by protues 7.3
Date : 2025-12-25 Size : 73kb User :
[SCM] curve-fitting DL : 0: 可以对AD采集数据进行精准的曲线拟合，拟合后将数据变为线性的。-AD data acquisition accurate curve fitting, fitting after data becomes linear.
Date : 2025-12-25 Size : 324kb User : nickyang
[SCM] Ds18b20P5110-RBI-curve-shows DL : 0: 读取DS18B20测得的温度值并在LCD5110上显示出来，同时，在LCD5110上连续根据温度值的大小打点，显示温度曲线。-DS18B20 read the measured temperature values and displayed on LCD5110, while the temperature in the LCD5110 continuous dot size value, shows the temperature curve.
Date : 2025-12-25 Size : 293kb User : 徐扬

« 12 3 4 5 6 7 8 9 10 »