Search - calibrate

Search - calibrate - List

[SCM] E2004b DL : 0: 电子日历时钟,基本性要求（1）显示北京时间（2）能够校准时间 -Electronic calendar clock, the basic requirements (1) shows that Beijing (2) to calibrate the time
Date : 2025-12-20 Size : 9kb User : asdfnb
[SCM] Calibrate DL : 0: 触摸屏的校正程序。可以用于触摸屏的校正。在三星的平台上测试通过-Touch screen calibration procedure. Can be used for touch-screen calibration. Samsung
Date : 2025-12-20 Size : 2kb User : 洪炎峰
[SCM] Calibration_of_the_internal_RC_oscillator DL : 0: 一种校准内部RC振荡器的方法，针对所有带可调（内部）RC振荡器的AVR芯片。除此之外，还提供了一个可以自行修改（参数值）的简单软件（用于校准内部RC振荡器）。这使得AVR芯片可以用AVR开发工具进行校准.-A calibration method of the internal RC oscillator, all with adjustable (internal) RC oscillator of the AVR chip. In addition, also provided a self-modification (parameter values) of the simple software (used to calibrate the internal RC oscillator). AVR which the chip can be calibrated AVR development tools.
Date : 2025-12-20 Size : 136kb User : ECN
[SCM] Touch_touch-screen_learning_and_program_developmen DL : 0: 触摸屏学习及触控程序开发,将介绍如何编写软件驱动程序，从而能够使用这些微处理器配置、校准触摸屏以及对触摸屏输入持续响应。-Touch touch-screen learning and program development, will describe how to write software drivers to be able to use these microprocessors to configure, calibrate touch screen as well as continuing to respond to touch screen input.
Date : 2025-12-20 Size : 54kb User : 周松
[SCM] Calibrate DL : 0: ATmega406电流电压校准头文件,用于电流电压测量-ATmega406 voltage Calibrate
Date : 2025-12-20 Size : 2kb User : jim
[SCM] aspc DL : 0: Simple calibrate routine for MCF52227 ColdFire adn touch screen driver
Date : 2025-12-20 Size : 17kb User : Bialy123
[SCM] XBOX_360_POT_CALIBRATION_V1.0_by_Moda DL : 0: A guide to calibrate the laser power of a Xbox360 DVD-ROM
Date : 2025-12-20 Size : 146kb User : Denis®
[SCM] Source_right DL : 0: parameter self-calibrate Location algorithm based on RSSI with CC2530
Date : 2025-12-20 Size : 45kb User : 郭靖
[SCM] A-new-calibration-algorithm DL : 0: 干涉参数定标对于机载双天线InSAR（Interferometric Synthetic Aperture Radar）系统的大面积高精度数字高程模型（DEM，Digital Elevation Model）获取具有重要意义。为了高效地进行干涉参数定标，本文从双天线InSAR获取DEM的基本原理出发，构建了一种新的考虑干涉相位偏置、基线长度和基线水平角三个干涉参数的外定标模型，设计了外定标模型的未知参数解算方案。利用GPS（Global Position System，全球定位系统）实测的高程控制点对中国科学院电子学研究所自主研制的机载双天线InSAR系统进行了干涉参数定标实验，统计了利用定标后干涉参数反演地面高程的精度，验证了所采用外定标模型及解算方案的正确性和有效性。-It is significant to calibrate interferometric parameters of dual-antenna airborne InSAR（Interferometric Synthetic Aperture Radar）systems for deriving accurate DEM (Digital Elevation Model) with large areas. A new outside calibration model considering phase offset, baseline length and baseline angle was proposed in order to calibrate interferometric parameters effectively, which was induced from the basic theory of DEM deriving from InSAR. And its solution scheme was designed. The outside calibration experiments were done with height control points measured by GPS to calibrate the dual-antenna airborne InSAR system researched independently by Institute of Electronics, Chinese Academy of Sciences. The accuracy of heights derived with calibrated interferometric parameters was calculated, as validated the proposed calibration model and its solution algorithm.
Date : 2025-12-20 Size : 1.28mb User : jgw
[SCM] VLO_Lib DL : 0: 德州提供用于校准MSP430单片机内部的超低功耗超低频率振荡器（VLO）的资料，有源码及说明文件-Texas provides ultra-low frequency oscillator (VLO) is used to calibrate the ultra-low power MSP430 microcontroller internal data, source code and documentation
Date : 2025-12-20 Size : 7kb User : ccstc
[SCM] calibrate DL : 0: 基于TI cortex-M3 (LM3S9B96)的电阻式触摸屏校正程序源代码.使用MCU内部的ADC模数转换功能实现触摸屏的驱动控制.-Resistive touch screen calibration procedure based on TI cortex-M3 (LM3S9B96) the source code using the MCU s internal ADC analog to digital conversion function touch screen driver.
Date : 2025-12-20 Size : 387kb User : Zou MF
[SCM] clock DL : 0: 数字日历时钟，1．数码管显示：秒、分、时（可同时显示，也可轮换显示） 2．能够设置时间，“设置按键”数量不限，以简单合理易用为好。 3．误差：1秒／天（报告中要论述分析是否满足要求）扩展 1．设置校准键：当数字钟显示在“整点±30秒”范围时，按动“校准键”，数字钟即刻被调整到整点，消除了±30秒的误差。 2．加上“星期”显示（可以预置），并可以对其进行设置。 -Digital calendar clock, 1. Digital display: seconds, minutes, hours (can be displayed simultaneously, can also be rotated to display) 2. Be able to set the time, " Setting button" limited quantity, with a simple and reasonable to use as well. 3. Error: 1 second/day (to be discussed in the report meets the requirements analysis) extension 1. Set the calibration key: When the digital clock is displayed when " the whole point of 30 seconds," range, press " Calibrate button" , the digital clock is adjusted to the whole point instantly, eliminating the 30 seconds of errors. 2. Plus " week" shows (can be preset), and can be set up.
Date : 2025-12-20 Size : 2kb User : Dido
[SCM] aplicatie DL : 0: Calibrate 3D points in space
Date : 2025-12-20 Size : 1kb User : zi504681
[SCM] DHT11_DEMO DL : 0: 通过STM32读取DHT11的数据实现温湿度的采集，可以对采集到的数据进行校准能够得到交精准的数据(STM32 read through the DHT11 data, temperature and humidity acquisition, you can calibrate the collected data, you can get accurate data)
Date : 2025-12-20 Size : 1.05mb User : 明权10323