3. A/D circuit simulation program design and the external voltage through the AD sampling, and then come back using the SPI interface of the sampling data show, and the conversion results sent to the host computer via the UART for display. First set the array needs to be displayed, use PINSEL0, PINSEL1 register set the serial port 0, use the control port IO0DIR set 74HC595, initialize the serial port 0, use U0LCR, U0DLM, U0DLL, U0LCR register set the baud rate, initializing the SPI interface, set SPI clock frequency, interface mode. Second, the ADC module settings, through the shift register ADCR select channel 0 setting, set the conversion clock, use software to convert, use the clock conversion, down conversion mode for non-operating mode, non-test mode, direct start ADC conversion, the use of pin falling edge trigger ADC conversion, read the ADC result and clears the DONE flag, switch channels and make the first conversion, waiting for the end of conversion, and then start the co

ADC\ADC.axf
...\ADC.C
...\adc.crf
...\adc.d
...\ADC.DSN
...\ADC.hex
...\ADC.htm
...\adc.i
...\ADC.lnp
...\ADC.map
...\adc.o
...\ADC.Opt
...\ADC.plg
...\ADC.PWI
...\ADC.sct
...\ADC.tra
...\adc.txt
...\ADC.Uv2
...\ADC_Opt.Bak
...\ADC_Target 1.dep
...\ADC_Uv2.Bak
...\Config.h
...\Last Loaded ADC.DBK
...\LPC2138.H
...\Startup.lst
...\Startup.o
...\Startup.s
...\Target.c
...\Target.h
ADC

• We are an exchange download platform that only provides communication channels. The downloaded content comes from the internet. Except for download issues, please Google on your own.
• The downloaded content is provided for members to upload. If it unintentionally infringes on your copyright, please contact us.
• Please use Winrar for decompression tools
• If download fail, Try it againg or Feedback to us.
• If downloaded content did not match the introduction, Feedback to us，Confirm and will be refund.
• Before downloading, you can inquire through the uploaded person information

Nothing．