Location:
Search - udp dm9000
Search list
Description: 基于s3c2440和vxworks的dm9000驱动代码，使用片选2，中断7，性能稳定，实际测试速度为40Mbps（UDP）
Platform: |
Size: 18013 |
Author: xiyong |
Hits:
Description: 基于s3c2440和vxworks的dm9000驱动代码，使用片选2，中断7，性能稳定，实际测试速度为40Mbps（UDP）-VxWorks-based S3C2440 and the dm9000 driver code, use the chip select 2, interrupt 7, stable performance, the actual test speed of 40Mbps (UDP)
Platform: |
Size: 17408 |
Author: xiyong |
Hits:
Description: mini2440驱动dm9000（无操作系统），实现udp发送，速率59Mbps-mini2440 driver dm9000 (no operating system) to achieve udp send, rate of 59Mbps
Platform: |
Size: 842752 |
Author: sunyong |
Hits:
Description: 本系统设计并实现了基于 LPC2292, DM9000 的嵌入式网络通讯协议，协议遵循 RFC 标准 TCP/IP 规范。使用标准 C++ 语言在 ADS 下开发，完全源代码，方便移植与维护，代码小且运行效率高，容易进行二次开发。
系统实现了：以太网数据帧的收发、ARP 请求与应答、ICMP 中的 Ping 请求与应答、IP、UDP、简易的路由处理，可跨越网关收发数据。
使用本系统可进行各种具备网络功能产品的开发，如 VoIP 电话系统, 网络打印机，终端系统，各种监控系统、数据采集系统、远程控制系统等。-The system was designed and implemented based on LPC2292, DM9000 embedded network communication protocol, protocol to follow RFC standards for TCP/IP standard. Using standard C++ language, developed in the ADS, complete source code to facilitate the migration and maintenance, the code small and efficient operation, easy for secondary development. System implementation: the sending and receiving Ethernet data frames, ARP requests and responses, ICMP Ping requests and response in, IP, UDP, simple routing, may send and receive data across the gateway. Use of this system with network function can be a variety of product development, such as VoIP phone systems, network printers, end systems, various monitoring systems, data acquisition system, remote control systems.
Platform: |
Size: 13312 |
Author: limei |
Hits:
Description: int main (void)
{
PINSEL0 = (0x00000005)|(0x03<<18) //P0.0 P0.1用作UART
PINSEL1 = 0x00000000 //其余为GPIO
ReadModuleP() // 读参数
SetNetPort()
InitializeInterrupt()
InitNic(0) //RTL8019芯片初始化,在global.c中定义
//WDTC =27662592 //2s
//WDMOD =0X03
printf("Start OK!\n")
while(1)
{
if(WorkMode==CLIENTHOST) //TCP客户端
ClientHostProcess()
if(WorkMode==SERVERHOST) //tcp 服务器
ServerHostProcess()
if(WorkMode==UDPHOST) //UDP 模式
UDPHostProcess()
}
return 0
}
- int main (void)
{
PINSEL0 = (0x00000005)|(0x03<<18) //P0.0 P0.1用作UART
PINSEL1 = 0x00000000 //其余为GPIO
ReadModuleP() // 读参数
SetNetPort()
InitializeInterrupt()
InitNic(0) //RTL8019芯片初始化,在global.c中定义
//WDTC =27662592 //2s
//WDMOD =0X03
printf("Start OK!\n")
while(1)
{
if(WorkMode==CLIENTHOST) //TCP客户端
ClientHostProcess()
if(WorkMode==SERVERHOST) //tcp 服务器
ServerHostProcess()
if(WorkMode==UDPHOST) //UDP 模式
UDPHostProcess()
}
return 0
}
Platform: |
Size: 692224 |
Author: 程教育 |
Hits:
Description: 一种基于s3c2440与vxworks的dm9000驱动driver代代码，使用片选2，中断7，性能稳定，实际测试速度为40Mbps（UDP）
-A dm9000 driver s3c2440 with vxworks driver generation of code, using the chip select 2 interrupt 7, stable performance, the actual test speed of 40Mbps (UDP)
Platform: |
Size: 17408 |
Author: 夏妮 |
Hits:
Description: 基于ADS，DM9000,LPC2290，无OS，纯TCP/IP源码 UDP CODE -ADS1.2，DM9000,LPC2290，NO OS，TCP/IP CODE UDP CODE
Platform: |
Size: 62464 |
Author: gaga |
Hits:
Description: 基于ADS，DM9000,LPC2290，UCOS，纯TCP/IP源码 UDP CODE -ADS1.2，DM9000,LPC2290，UCOS，TCP/IP UDP CODE
Platform: |
Size: 130048 |
Author: gaga |
Hits:
Description: 基于FPGA的UDP网络图像传输实验，FPGA完成了MT9V034的RAW图像采集缓存，NIOS完成了图像的UDP封包，DM9000芯片完成了MAC和PHY的功能。-Based on the UDP FPGA network image transmission experiment, FPGA completed the RAW MT9V034 image acquisition cache, NIOS completed the image of the UDP packets, DM9000 chip MAC and PHY completed the function.
Platform: |
Size: 6025216 |
Author: 丁 |
Hits:
Description: 网卡DM9000A的裸机驱动程序，包含简单的发送ARP包，UDP包的测试程序，适合DM9000底层驱动开发的人群-Bare metal DM9000A driver, including simple send ARP packets, UDP packet test procedures, suitable for the bottom of the dm9000 driver development population
Platform: |
Size: 5120 |
Author: 张脩 |
Hits:
Description: 用FPGA驱动DM9000的程序代码通过UDP(Use FPGA to drive the DM9000 program code)
Platform: |
Size: 7446528 |
Author: lemonqin |
Hits: