Location:
Search - motor.r
Search list
Description: 步进电机的源代码，12V，步进角7.5度，一周48次，比较实用-stepper motor source code, 12V, step angle of 7.5 degrees, 48 times a week, more practical
Platform: |
Size: 3072 |
Author: 海洋 |
Hits:
Description: 实现电机的速度控制,能够显示在LCD1602上,希望大家参考!
Platform: |
Size: 1024 |
Author: 谢少文 |
Hits:
Description: This programme is to control DC motor in a certain speed using PWM.
The target speed is "r", it is the speed in 1s.
The sample rate is 0.1s, so the actual speed target is "rc"=r/10.
The "r" and "rc" are integer, and the range of "r" is from 50 to 100.
Keep rc=r/10!!!
The array "speed1" and "speed2" are the control result, in 0.1s and 1s.
The length of "speed1" is 2400, and "speed2" is 240.
The "pw" and "nw" are the parameters of PWM.
The test will last 4 min.-err
Platform: |
Size: 2048 |
Author: 李前夕 |
Hits:
Description: DSP2812开发的无刷直流电机控制程序,希望对大家有帮助!
-DSP2812 developed brushless DC motor control procedures, and they hope to have everyone help!
Platform: |
Size: 316416 |
Author: Owen |
Hits:
Description: 步进电机仿真项目，Protues仿真，程序简单，适合初学者。-Stepper motor simulation project, Protues simulation, the procedure is simple, suitable for beginners.
Platform: |
Size: 45056 |
Author: yizhang |
Hits:
Description: 本程序采用vhdl语言对步进电机及伺服电机进行控制，控制方式灵活，有变速，正反转，显示等多个模块-This procedure using VHDL language of stepper motor and servo motor control, control flexibility, have variable speed, positive, showing a number of modules, etc.
Platform: |
Size: 4096 |
Author: 阿汤 |
Hits:
Description: 毕业设计的一个PMAC源码，用来控制直线电机，实现 光栅尺寻零， 并根据输入频率控制直线电机 产生正弦振荡-Designed as a graduate PMAC source, used to control the linear motor, achieve Grating find zero, and in accordance with an input frequency control of linear motors have a sinusoidal oscillation
Platform: |
Size: 3072 |
Author: |
Hits:
Description: 测量电机转速，要求用定时计数器T1完成计数、T0完成定时，并假设电机转速小于 //
//65536转/分、在120ms内至少有1转（单片机晶体为6M，使用模式1将T1的 计数值放 /
//入fcy中 转速的脉冲输出接在T1脚上(即作为T1的外部工作时钟,将T1的初始值设为0//
//在一定时间内(120ms内T1的计数值不会翻转)读出T1中的值就能算出其转速) -Measuring motor speed, requires completion of timing T1 count counter, T0 completion time, and assuming the motor speed is less than//// 65536 r/min, in at least 120ms to 1 (single-chip crystal to 6M, the use of model 1 T1 value of the put///fcy in speed to the pulse output then feet in T1 (ie T1, as the work of the external clock, the initial value of T1 is set to 0//// in a certain period of time (120ms with T1 The total value will not be reversed) to read out the value of T1 will be able to calculate its speed)//
Platform: |
Size: 1024 |
Author: 铃兰 |
Hits:
Description: DC Motor Speed Control using Fuzzy Logic based on LabVIEW
Thepsatorn, P. Numsomran, A. Tipsuwanporn, V. Teanthong, T.
SICE-ICASE, 2006. International Joint Conference
18-21 Oct. 2006 Page(s):3617 - 3620
Digital Object Identifier 10.1109/SICE.2006.314890 -DC Motor Speed Control using Fuzzy Logic based on LabVIEW
Thepsatorn, P. Numsomran, A. Tipsuwanporn, V. Teanthong, T.
SICE-ICASE, 2006. International Joint Conference
18-21 Oct. 2006 Page(s):3617- 3620
Digital Object Identifier 10.1109/SICE.2006.314890
Platform: |
Size: 2297856 |
Author: boyang |
Hits:
Description: 基于TMS320F2812柴油发电机转速系统的设计，关键部分程序已经给出，对于控制电机程序设计很有参考价值-TMS320F2812-based diesel generator speed system design, the key part of the procedure has been given for the control of motor programming of great reference value to
Platform: |
Size: 443392 |
Author: wql |
Hits:
Description: VHDL程序设计应用举例：直流电机控制器-VHDL programming and application examples: DC Motor Controller
Platform: |
Size: 6144 |
Author: 古月 |
Hits:
Description: 电机采用35BYJ46步进电机。（以后可能要用转矩较大的步进电机，第一次打样先采用此电机代替。）
2）在油烟机电源开关打开后，电机顺时钟旋转14°，角速度要求每秒7°。即电机顺时针旋转14°后立即停止，要求精确定位；相反，当油烟机电源开关关闭后，电机以相同速度逆时钟旋转14°。
-,Motor stepper motor using 35BYJ46. (Since it may take a large step motor torque, for the first time using this motor to replace the first proofs.) 2) Open the power switch in the hood, the motor clockwise rotation 14 °, the angular velocity required per second 7 °. The motor clockwise 14 ° after the cease and precise positioning requirements the contrary, when the smoke machine power switch closed, the motor speed to the same counter-clockwise rotation 14 °.
Platform: |
Size: 6144 |
Author: zhang1 |
Hits:
Description: Abstract :-
Single-phase Cycloconverters are used for AC-AC power conversion particular for speed control of AC drives. In this work the Single-phase to single phase cycloconverter is simulated in simulink with the loads as R-Load, RL- Load & 1 phase split phase Induction Motor. Thyristors are used as the power switches during this work.
-Abstract :-
Single-phase Cycloconverters are used for AC-AC power conversion particular for speed control of AC drives. In this work the Single-phase to single phase cycloconverter is simulated in simulink with the loads as R-Load, RL- Load & 1 phase split phase Induction Motor. Thyristors are used as the power switches during this work.
Platform: |
Size: 601088 |
Author: AMIT KUMAR |
Hits:
Description: full brushless dc motor r model in matlab based on step motor model
Platform: |
Size: 17408 |
Author: nimi |
Hits:
Description: 89c51步进电机的驱动设计.设计要求.
开机后，电机不转，按下启动键，电机旋转，速度为25 r/min，按下加1键速度增加，按下减1键，速度降低，最高速度为100 r/min,最低转速为25 r/min，按下停止键，电机停转。速度值要求在数码管上显示出来。
-89c51 stepper motor drive design. Design requirements. Turned on, the motor does not turn, press the start button, the motor rotation speed 25 r/min, press the button to add a speed increase by a button press, the speed reduction The maximum speed is 100 r/min, the minimum speed of 25 r/min, press the stop button, the motor stopped. Velocity required in the digital tube display.
Platform: |
Size: 100352 |
Author: weiguo |
Hits:
Description: 基于卡尔曼滤波器的永磁同步电机的二阶电阻辨识-Kalman filter based on permanent magnet synchronous motor of the second-order Resistance Identification
Platform: |
Size: 5682176 |
Author: zzy |
Hits:
Description: 用ATMEGA16内置的T/C0 TC1 T/C2定时计数器产生三个PWM，其中T0 T2分别控制电机L和电机R.自己编写的程序，成功实现，适合初期机器人开发，源代码含详细说明。
-ATMEGA16 using the built-in timer counter T/C0 TC1 T/C2 produce three PWM, which T0 T2, respectively, motor control and motor R. L
Platform: |
Size: 33792 |
Author: 孙小美 |
Hits:
Description: DC MOTOR CONSTANTS
Motor constants are parameters used to define motor
characteristics. Torque constant (KT) and resistance (R)
completely define a permanent magnet motor in terms of
determining speeds, torques, efficiencies, currents, etc.
Platform: |
Size: 19456 |
Author: khad28 |
Hits:
Description: EFFICIENCY ANALYSIS OF AN INDUCTION MOTOR WITH DIRECT TORQUE AND FLUX CONTROL AT A HOT ROLLING MI-EFFICIENCY ANALYSIS OF AN INDUCTION MOTOR WITH DIRECT TORQUE AND FLUX CONTROL AT A HOT ROLLING MILL
Platform: |
Size: 107520 |
Author: icirdei |
Hits:
Description: its calculating, how to activate electric motor in active suspension system.
Platform: |
Size: 12288 |
Author: alireza |
Hits: