Location:
Search - LCD 4 bit VHDL
Search list
Description: LCD1062的显示驱动，是4线并行显示-The LCD1062 display driver is a 4-wire parallel display
Platform: |
Size: 1024 |
Author: 马亮 |
Hits:
Description: it is a 4-bit lcd driver written in verilog .it will work on spartan 3 xilini devices.
Platform: |
Size: 3072 |
Author: ali |
Hits:
Description: 典型实例10.8 字符LCD接口的设计与实现
软件开发环境：ISE 7.1i
硬件开发环境：红色飓风II代－Xilinx版
1. 本实例控制开发板上面的LCD的显示；
2. 工程在\project文件夹里面
3. 源文件和管脚分配在\rtl文件夹里面
4. 下载文件在\download文件夹里面,.mcs为PROM模式下载文件,.bit为JTAG调试下载文件。-Typical examples of character LCD interface 10.8 The Design and Implementation of Software Development Environment: ISE 7.1i development environment hardware: Hurricane II on behalf of the red-Xilinx Edition 1. The above examples of the control board of the LCD display 2. Projects \ project folder inside 3. the distribution of the source file and pin in \ rtl folder inside 4. download files in \ download folder inside,. mcs file for the PROM mode download,. bit for the JTAG debugger to download the file.
Platform: |
Size: 313344 |
Author: 王磊 |
Hits:
Description: Camera Interface模块是视频输入转换存储模块。该模块一端接通用的video camera设备，另一端接AHB总线。实现了将Camera捕捉到的数据进行转换、并通过DMA存储到memory中。该IP支持ITU-R BT 601/656 8-bit 模式。支持YCbCr, RGB格式输入。可以将camera产生的YCbCr信号转换成24bit RGB 信号，然后下采样生成16bit RGB 5：6：5的LCD能直接读取显示的数据。该设备支持图像的镜像和翻转，以便适应手持式设备在移动环境中图像的捕捉。可变的同步信号极性使得可以兼容各种摄像头外设。Camera Interface兼容AMBA规范， AHB SLAVE接口，用于读取软件配置数据和设置数据存放地址和1帧数据占用的空间。-The Camera IP Core is small and flexible video data coverter. It is connected to a typical video camera ICs with 8-bit digital video data, Horizontal synchronization and Vertical synchronization signals. The core is connected through FIFO to a WISHBONE bus on the other side. Both sides of the core can operate at fully asynchronous clock frequencies. The Camera IP Core convertes 4:2:2 YCbCr video data (sometimes called YUV, but not totally the same Y is the same, while Cb and Cr are U and V multiplied by a constant) to a 24-bit RGB. 24-bit or 16-bit RGB data, downsampled from 24-bit RGB, is then sent to the system (video) memory, however conversion can also be by-passed. Interrupt can be generated after frame-buffer in system (video) memory is filled up or after setable number of horizontal lines written to frame-buffer.
Platform: |
Size: 32768 |
Author: 孙喆 |
Hits: