Description: 设计一个6层电梯控制器。电梯控制器是按照乘客的要求自动上、下的装置。
1、每层电梯入口处设置上下请求开关，电梯内设有顾客到达层次的停站请求开关。
2、设有电梯所处位置指示装置以及电梯运行模式（上升或者下降）指示装置。
3、电梯每秒升降一层楼。
4、电梯到达有停站请求的楼层，经过1秒电梯门打开，开门4秒后，电梯门关闭（开门指示灯灭），电梯继续运行，直至执行完最后一个请求信号后停留在当前层。
5、电梯能记忆电梯内外所有请求信号，并按照电梯运行规则按顺序响应，每个请求信号保留至有电梯响应后消除。
6、初始状态为一层开门，第一层不用向下开关，最高层不用向上开关。
7、电梯运行规则：当电梯上升时，只响应比电梯所在位置高的上楼请求信号，由下而上逐个执行，直到最后一个上楼请求执行完毕；如果高层有下楼请求，则直接升到下楼请求的最高楼层，然后进入下降模式。当电梯处于下降模式时与上升正好相反。
-design of a six-story elevator controller. Elevator Controller in accordance with the requirements of passengers automatically, the device. 1, installed on each floor elevator entrance next request switches, elevator begins to reach the level of customer stops request switch. 2, the location of elevator and escalator installations instructions operation mode (up or down) device instructions. 3, Elevator per second floor landing. 4, the lift reached a request stops floors seconds after an elevator doors open door four seconds later, elevator doors closed (to open the door to eliminate light), the continued operation of the lift, End until the implementation of the final request for a signal to stay in the current layer. 5, the lift will lift internal and external memory signal to all reques Platform: |
Size: 1808 |
Author:zheng |
Hits:
Description: 用单片机实现电梯控制系统
电梯控制系统的工作原理是：当某
层有要梯信号输入时，呼梯信号锁存系
统将要梯信号锁存，待单片机查询到要
梯信号后，根据要梯信号的位置(即楼
层数)和电梯所处的位置，决定电梯运
行方向，并启动电梯到要梯层停梯、开
门，待乘客进入电梯关门后，再根据乘
客要求把乘客送到目的层。-with MCU elevator control system of the elevator control system working principle is : When a staircase layer to the input signal, calling signal latch system will be staircase signal latches, SCM pending inquiries to the staircase to signal, according to the location staircase signal (that is, number of floors) and the locations of elevators, decide the direction of the lift operation, and start to the elevator to stop staircase layer Ossetia, opened the door, the passengers entered the elevator closed, According passengers require passengers to the target zone. Platform: |
Size: 111616 |
Author:方凯旋 |
Hits:
Description: 设计一个6层电梯控制器。电梯控制器是按照乘客的要求自动上、下的装置。
1、每层电梯入口处设置上下请求开关，电梯内设有顾客到达层次的停站请求开关。
2、设有电梯所处位置指示装置以及电梯运行模式（上升或者下降）指示装置。
3、电梯每秒升降一层楼。
4、电梯到达有停站请求的楼层，经过1秒电梯门打开，开门4秒后，电梯门关闭（开门指示灯灭），电梯继续运行，直至执行完最后一个请求信号后停留在当前层。
5、电梯能记忆电梯内外所有请求信号，并按照电梯运行规则按顺序响应，每个请求信号保留至有电梯响应后消除。
6、初始状态为一层开门，第一层不用向下开关，最高层不用向上开关。
7、电梯运行规则：当电梯上升时，只响应比电梯所在位置高的上楼请求信号，由下而上逐个执行，直到最后一个上楼请求执行完毕；如果高层有下楼请求，则直接升到下楼请求的最高楼层，然后进入下降模式。当电梯处于下降模式时与上升正好相反。
-design of a six-story elevator controller. Elevator Controller in accordance with the requirements of passengers automatically, the device. 1, installed on each floor elevator entrance next request switches, elevator begins to reach the level of customer stops request switch. 2, the location of elevator and escalator installations instructions operation mode (up or down) device instructions. 3, Elevator per second floor landing. 4, the lift reached a request stops floors seconds after an elevator doors open door four seconds later, elevator doors closed (to open the door to eliminate light), the continued operation of the lift, End until the implementation of the final request for a signal to stay in the current layer. 5, the lift will lift internal and external memory signal to all reques Platform: |
Size: 2048 |
Author:zheng |
Hits:
Description: （1）用VHDL实现四层电梯运行控制器。
（2）电梯运行锁用一按钮代替（开锁上电），低电平可以运行，高电平不能运行。
（3）每层电梯入口处设有上行、下行请求按钮，电梯内设有乘客到达层次的停站要求开关，高电平有效。
（4）有电梯所处楼层指示灯和电梯上行、下行状态指示灯。
（5）电梯到达某一层时，该层指示灯亮，并一直保持到电梯到达另一层为止。电梯上行或下行时，相应状态指示灯亮。
（6）电梯接收到停站请求后，每层运行2秒，到达停站层，停留2秒后门自动打开，开门指示灯亮，开门6秒后电梯自动关门。
（7）能记忆电梯内、外的请求信号，并按照电梯的运行规则依次响应，请求信号保留至响应后撤除。
（8）人数超载或超重用一按钮代替，高电平有效，超载时电梯不能运行，并有相应指示。
（9）事故报警按钮高电平有效，事故报警不能运行，并有指示灯，信号保留至事故消除
-(1) the realization of four-storey elevator with VHDL controller operation.
(2) elevator button with a lock to run in place of (unlock power), low run, can not run high.
(3) on each floor with elevator at the entrance to the uplink, downlink request button, which are equipped with passenger elevators to reach the level of the requirements of stoppings switch, high effective.
(4) elevators and escalators which lights up the floor, down the state indicator.
(5) elevator to reach a certain level, the level indicator light, and has remained until the elevator arrived at another level. Elevator uplink or downlink, the corresponding status indicator light.
(6) Elevator stops receiving a request, each running two seconds to reach the stops layer, two seconds back door stay open automatically, open the door indicator light, 6 seconds after the elevator door closed automatically.
(7) to memory elevator inside and outside the request signal, and in accordance with the rules followed Platform: |
Size: 289792 |
Author:管皮皮 |
Hits:
Description: Consider the design of an elevator controller. The building has three floors, an up button the first floor, up and down buttons on the second floor, a down button on the third floor, and three buttons inside the elevator indicating the floor to go to. Note that more than one button inside the elevator may have been pressed and active at the same time. While you can make assumptions, the behavior of the system must be reasonable. For example, pressing the “Floor 2” button with the elevator on the second floor causes the elevator to remain there with its door open. Also if the elevator is moving from the second to the third floor, pressing the first floor button inside the elevator should have no effect. -Consider the design of an elevator controller. The building has three floors, an up button on the first floor, up and down buttons on the second floor, a down button on the third floor, and three buttons inside the elevator indicating the floor to go to. Note that more than one button inside the elevator may have been pressed and active at the same time. While you can make assumptions, the behavior of the system must be reasonable. For example, pressing the “Floor 2” button with the elevator on the second floor causes the elevator to remain there with its door open. Also if the elevator is moving from the second to the third floor, pressing the first floor button inside the elevator should have no effect. Platform: |
Size: 6144 |
Author:deepa |
Hits:
Description: 控制马达向上升起并等待到达事件，当电梯到达用户请求的楼层后，电梯控制门打开，在动作序列中，电梯控制器与门对象和马达对象交互。-Control the motor up and wait for the arrival raising events, when the lift reached the user requests the floor, the elevator control doors open, the action sequences, the elevator motor controller and door objects and object interactions. Platform: |
Size: 1721344 |
Author:dikong |
Hits:
Description: 高楼电梯自动控制系统(Windows平台上运行的ispLEVER编程软件。
):
1统控制的电梯往返于1-9层楼。
2客要去的楼层数可手动输入并显示（设为A数）。
3梯运行的楼层数可自动显示（设为B数）。
4A>B时，系统能输出使三相电机正转的时序信号，使电梯上升；
当A<B时，系统能输出使三相电机反转的时序信号，使电梯下降；
当A=B时，系统能输出使三相电机停机的信号，使电梯停止运行并开门；
5是上升还是下降各层电梯门外应有指示，各层电梯门外应有使电梯上升或下降到乘客所在楼层的控制开关。
注：此为word文档，但里面有源代码。-High-rise elevator control system (Windows platform programming software running on the ispLEVER.
):
An elevator control system and from 1-9 floors.
2, the number of passengers going to the floor can manually enter and display (Make A number).
3 ladder run automatically display the number of floors (Set B number).
4A> B, the system can output three-phase motor is transferred to the timing signal to lift up
When A <B, the system can output three-phase motor to reverse the timing signal to the lift down
When A = B, the system can output a signal to shut down three-phase motor, so that the lift stops and open the door
5 is increasing or decreasing the lift on each floor outside the door should be directed, due to lift on each floor outside the elevator up or down to the floor where the passenger control switch.
Note: This is a word document, but inside the source code. Platform: |
Size: 34816 |
Author: |
Hits:
Description:
1 三层电梯控制器将实现的功能
(1)每层电梯入口处设有上下请求开关，电梯内设有顾客到达层次的停站请求开关。
(2)设有电梯入口处位置指示装置及电梯运行模式(上升或下降)指示装置。
(3)电梯每秒升(降)一层楼。
(4)电梯到达有停站请求的楼层，经过1秒电梯门打开，开门指示灯亮，开门4秒后，电梯门关闭(开门指示灯灭)，电梯继续进行，直至执行完最后一个请求信号后停留在当前层。
(5)能记忆电梯内外所有请求，并按照电梯运行规则按顺序响应，每个请求信号保留至执行后消除。
(6)电梯运行规则一当电梯处于上升模式时，只响应比电梯所在位置高的上楼请求信号，由下而上逐个执行，直到最后一个上楼请求执行完毕；如果高层有下楼请求，则直接升到由下楼请求的最高层，然后进入下降模式。当电梯处于下降模式时则与上升模式相反。
(7)电梯初始状态为一层开门状态。
-A three-lift controller functions to be achieved
(1) the entrance of each floor with elevator up and down the request switch, the elevator is equipped with customer requests to reach levels stop switch.
(2) with elevator entrance and elevator position indicator device operation mode (up or down) installation instructions.
(3) elevators per liter (lower) floor.
(4) The elevator reaches a floor request stops after 1 second elevator door open, open indicator light, open 4 seconds, the elevator doors closed
(Open LED OFF), the lift continued until the implementation of the complete signal after the last request to stay in the current layer.
(5) can remember all requests inside and outside the elevator and elevator operation in accordance with the rules in order to respond to each request signal to be retained until after the implementation of consumer
In addition.
(6) the operating rules of an elevator when the elevator is up mode, the only response to the h Platform: |
Size: 3072 |
Author:许敏 |
Hits:
Description: 电梯控制器的功能 本电梯控制器分为主控制器与分控制器。主控制器是电梯内部的控制器，每个楼层有一个分控制器。主控制器的功能： （1）完成16个楼层多用户的载客服务控制。 （2）电梯运行时显示出来来电梯的的运行方向与所在的楼层。 （3）当电梯到达选择的楼层时，电梯自动开门。 （4）具有提前关电梯门与延时关电梯门的功能。 （5）响应分控制器的有效请求，如果到达有请求的楼层，电梯自动开门。
-The elevator controller function of the elevator controller points to the main controller and sub controller. The host controller is the controller inside the elevator, each floor has a sub-controller. The main controller functions: (1) complete control of the 16 floors of the multi-user passenger service. (2) lift out to the elevator running direction of the floor where the runtime. (3) When the lift reached the selected floor, elevators, automatic door. (4) advance off of the elevator door and delay shut the elevator door. (5) response to the sub-controller request, if you reach the requested floor, the elevator automatically open the door. Platform: |
Size: 163840 |
Author:leyuan |
Hits:
Description: 设计一个6层电梯控制器。电梯控制器是按照乘客的要求自动上、下的装置。1、每层电梯入口处设置上下请求开关，电梯内设有顾客到达层次的停站请求开关。2、设有电梯所处位置指示装置和电梯运行模式（上升或者下降降降）指示装置。3、电梯每秒升降一层楼。4、电梯到达有停站请求的楼层，经过1秒电梯门打开，开门4秒后，电梯门关闭（开门指示灯灭），电梯继续运行，直至执行完最后一个请求信号后停留在当前层。5、电梯能记忆电梯
-Design of a 6-story elevator controller. The elevator controller is automatically in accordance with the requirements of the passengers on the device. 1, each elevator at the entrance to request the switch up and down the elevators are equipped with the stops of the customer to reach the level of the request switch. 2 with elevator position indicator device and elevator operation mode (up or down down down) indicating device. Lift second lift floor. The lift reached the floor stops the request, after one second the elevator doors open, open the door four seconds after the elevator doors close (door light is off), the elevator continues to run until after the implementation of the last request signal to stay in the current layer. 5, the elevator can remember the elevator Platform: |
Size: 2048 |
Author:leyuan |
Hits:
Description: Verilog 电梯控制器设计 设计一个八层楼房自动电梯控制器，用八个 LED显示出来电梯行进过程，并有数码管显示出来电梯当前所在楼层位置，在每层电梯入口处设有请求按钮开关，请求按钮按下则相应楼层的的LED 亮亮。 用 CLK脉冲控制电梯运动，每来一个 CLK脉冲电梯升（降）一层。电梯到达有请求的楼层后，该层次的指示灯灭，电梯门打开（开门指示灯亮），开门 5 秒后，电梯门自动关闭，电梯继续运行。
-Automatic elevator controller Verilog elevator controller design design an eight-story buildings with eight LED display out of the elevator moving process, and a digital display out of the elevator where the floor position with Request button switch on each elevator entrance, the request button is pressed the corresponding floors LED bright. CLK pulse to control the elevator movement, each to a CLK pulse elevator up (down) layer. The elevator to reach the requested floor, the level of the indicator off, the elevator door open (door lights), open the door five seconds after the elevator doors close automatically, the elevator continues to run. Platform: |
Size: 76800 |
Author:leyuan |
Hits:
Description: 基于microchip的16位单片机电梯门机直流控制器，已通过工程验证，批量应用于工程。-Microchip-based 16-bit microcontroller elevator door machine DC controller has been verified by engineering batch used in engineering. Platform: |
Size: 111616 |
Author:李明辉 |
Hits:
Search - Elevator Door Controller